针对船舶机桨匹配计算软件基于单机操作和缺乏远程协同作业支持等问题,在分析回归系数法基础上,采用MATLAB与C#混合编程的方法实现基于B/S模式的船舶机桨匹配远程计算平台,通过互联网访问进入该平台并进行匹配计算,采用文献数据作为实验数据输入本平台,将计算结果与文献结果对比.结果表明,该平台计算结果与文献结果吻合,计算误差处于工程容忍范围之内,验证了平台计算结果的正确性.%The matching software of screw propeller and diesel engine is usually based on stand-alone operation and lack the support for remote synergetic work.To overcome this problem, after examining the coefficient of regression method, the MATLAB was used combined with C# to realize the remote calculation platform based on B/S model.Through the internet access into the calculation platform, using the literature data as the experiment data input of the platform.It was shown that the calculated results of the platform were in agreement with the literature results, and the calculation error was within the tolerance range of the project, proving the correctness of the platform.
展开▼