具有p-GaN岛状埋层耐压结构的横向AlGaN/GaN高电子迁移率晶体管

摘要

The relatively low breakdown voltage (BV ) seriously restricts the high power application of GaN based high electron mobility transistors (HEMTs). In this work, a novel AlGaN/GaN HEMT with buried p-n junctions is investigated to improve the breakdown characteristics by introducing six equidistant p-GaN islands buried buffer layer (PIBL) into the n-GaN epitaxial layer. The p-GaN islands act as reversed p-n junctions, which produces new electric field peaks at the edges of p-GaN islands, then realizing a much high breakdown voltage, and the reversed p-n junctions can help to suppress punch-through effect in buffer layer. Furthermore, the characteristics of proposed device are analyzed in detail from the aspects of off-state I-V characteristics, equipotential contour distribution, off-state electric field distribution, off-state carrier distribution and output characteristics. Simulated equipotential contour distribution shows that under the condition of high-voltage blocking state, multiple reverse p-n junctions introduced by the buried p-GaN islands produce five new electric field peaks, realizing a more uniform equipotential contour distribution especially at the edges of the buried p-islands. Then off-state electric field distribution demonstrates that p-GaN islands modulate the surface and bulk electric fields, which makes the voltage distributed in a larger area, therefore presenting a much higher breakdown voltage. It can be seen from off-state carrier distribution that the electrons in the buffer layer fully depleted in PIBL HEMT effectively suppress the buffer leakage current, thus alleviating the buffer-leakage-induced impact ionization leading to a high breakdown BV of over 1700 V with gate-to-drain length of 10 μm, which is nearly 3 times larger than BV of 580 V in conventional AlGaN/GaN HEMT. Although, the introduction of p-type buried layer narrows the current path and causes an improved on-resistance, simulation shows that the specific on-resistance (Ron,sp) of PIBL HEMT is only about 1.47 m?·cm2, while the BV of the PIBL device is over 1700 V, and the obtained figure of merit (F OM =BV 2/Ron,sp) reaches as high as 1966 MW·cm-2. The optimization of device structure reveals that when the distance between p-GaN layer and AlGaN layer (t) is 0.2 μm, a thinner buried p-GaN island (tp) should help to realize a more significant electric field modulation, and PIBL HEMT can achieve a maximum BV of 1789 V with a tp = 0.1 μm. Compared with the traditional AlGaN/GaN HEMT, the PIBL HEMT reveals a higher breakdown voltage, meanwhile ensuring low Ron,sp, which makes this structure a promising candidate in the applications of high power electronic devices.%GaN基高电子迁移率晶体管(HEMT)相对较低的击穿电压严重限制了其大功率应用.为了进一步改善器件的击穿特性,通过在n-GaN外延缓冲层中引入六个等间距p-GaN岛掩埋缓冲层(PIBL)构成p-n结,提出一种基于p-GaN埋层结构的新型高耐压AlGaN/GaN HEMT器件结构.Sentaurus TCAD仿真结果表明,在关态高漏极电压状态下,p-GaN埋层引入的多个反向p-n结不仅能够有效调制PIBL AlGaN/GaN HEMT的表面电场和体电场分布,而且对于缓冲层泄漏电流有一定的抑制作用,这保证了栅漏间距为10μm的PIBL HEMT能够达到超过1700 V的高击穿电压(BV),是常规结构AlGaN/GaN HEMT击穿电压(580 V)的3倍.同时,PIBL结构AlGaN/GaN HEMT的特征导通电阻仅为1.47 m?·cm2,因此获得了高达1966 MW·cm-2的品质因数(F OM=BV 2/Ron,sp).相比于常规的AlGaN/GaN HEMT,基于新型p-GaN埋岛结构的HEMT器件在保持较低特征导通电阻的同时具有更高的击穿电压,这使得该结构在高功率电力电子器件领域具有很好的应用前景.