首页> 外文期刊>Tribology Transactions >A New Life Theory for Rolling Bearings - By Linkage between Rolling Contact Fatigue and Structural Fatigue
【24h】

A New Life Theory for Rolling Bearings - By Linkage between Rolling Contact Fatigue and Structural Fatigue

机译:滚动轴承的新寿命理论-滚动接触疲劳与结构疲劳之间的联系

获取原文
获取原文并翻译 | 示例
           

摘要

Based on a linkage between rolling contact fatigue and structural fatigue, a new life theory for rolling bearings has been proposed using the three-parameter Weibull distribution function. A minimum life is introduced as the third parameter, which may be considered independent from the statistical strength of material. The following are the new findings: (1) Reliability functions and life equations were introduced for the rolling bearing races and the life test specimens made of the same material (JIS SUJ2/AISI 52100), and the linkage between them has successfully been established by using linkage factors. (2) The 90% load rating and rating life formulas for the races as well as for the whole bearing were developed. (3) Newly introduced 100% load rating and rating life formulas were postulated by introducing the minimum lives for the life tests and theoretical research. (4) For the ratios of each load rating between the test results on the grease-lubricated deep-groove ball bearings and the new life theory, the linkage factors were determined as β= 2.4 and β' = 2.16 for 90 and 100% load ratings, respectively. (5) A reduction factor λ for 100% load rating was determined as λ =β'/β = 0.9.
机译:基于滚动接触疲劳与结构疲劳之间的联系,提出了一种使用三参数威布尔分布函数的滚动轴承寿命理论。引入最小寿命作为第三个参数,可以将其视为独立于材料的统计强度。以下是新发现:(1)引入了滚动轴承座圈和由相同材料制成的寿命试验样品(JIS SUJ2 / AISI 52100)的可靠性函数和寿命方程,并成功地建立了两者之间的联系。使用链接因子。 (2)制定了用于座圈以及整个轴承的90%额定载荷和额定寿命公式。 (3)通过引入寿命试验和理论研究的最小寿命,推定了新引入的100%额定载荷和额定寿命公式。 (4)对于脂润滑的深沟球轴承的测试结果与新寿命理论之间的每个额定载荷之比,对于90%和100%的载荷,连杆系数确定为β= 2.4和β'= 2.16评级。 (5)确定100%额定负载的折减系数λ为λ=β'/β= 0.9。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号