Research on CMOS mm-wave circuits and systems for wireless communications

摘要

This paper discusses some challenges in the design of millimeter-wave (mmwave) circuits and systems for 5th generation (5G) wireless systems in CMOS process. The properties of some passive and active devices such as inductors, capacitors, transmission lines, transformers and transistors in mm-wave frequency band are discussed. Self-healing technique dealing with PVT variation, resonant mode switching technique to enhance frequency tuning range of voltage controlled oscillator (VCO) and dual mode technique for power amplifier (PA) efficiency enhancement are introduced. At last, A fully-integrated 60 GHz 5 Gb/s QPSK transceiver with the transmit/receive (T/R) switch in 65nm CMOS process is introduced. The measured error vector magnitude (EVM) of the TX is -21.9 dB while the bit error rate (BER) of the RX with a -52 dBm sine-wave input is below 8e-7 when transmitting/receiving 5 Gb/s data. The transceiver is powered by 1.0 V and 1.2 V supply (except the phase-frequency detector and charge-pump in the frequency synthesizer which are powered by 2.5 V supply) and consumes 135 mW in TX mode and 176 mW in RX mode.