首页> 外文会议>SAE International Fuels and Lubricants Meeting and Exposition >A study of the homogeneous charge compression ignition combustion process by chemiluminescence imaging
【24h】

A study of the homogeneous charge compression ignition combustion process by chemiluminescence imaging

机译:化学发光成像的均匀电荷压缩点火燃烧过程研究

获取原文

摘要

An experimental study of the Homogeneous Charge Compression Ignition (HCCI) combustion process has been conducted by using chemiluminescence imaging. The major intent was to characterize the flame structure and its transient behavior. To achieve this, time-resolved images of the naturally emitted light were taken. Emitted light was studied by recording its spectral content and applying different filters to isolate species like OH and CH. Imaging was enabled by a truck-sized engine modified for optical access. An intensified digital camera was used for the imaging. Some imaging was done using a streak-camera, capable of taking eight arbitrarily spaced pictures during a single cycle, thus visualizing the progress of the combustion process. All imaging was done with similar operating conditions and a mixture of n-heptane and iso-octane was used as fuel. Some 20 crank angles before Top Dead Center (TDC), cool flames were found to exist. They appear with a faint structure, evenly distributed throughout the combustion chamber. There was no luminosity recorded between the end of cool flames and the start of the main heat release. Around TDC the main heat release starts. Looking at a macro scale, we find that the charge starts to burn simultaneously at arbitrary points throughout the charge. Since the thermal boundary layer is colder than the bulk of the charge, the local heat release is delayed close to the walls. As a result, the total heat release is slowed down. Ensemble averaged images show this wall boundary effect clearly when plotted against CAD. The peak intensity at the main combustion event is one order of magnitude greater than that of the cool flame and the structure is a lot more protruding. Since spontaneous emission imaging is a line-of-sight integration, the flame structure appears a bit smeared. The micro-scale structure is very similar from one cycle to another, but there are large variations between cycles on the macro scale.
机译:均质充量压缩点火(HCCI)燃烧过程的实验研究已经通过使用化学发光成像进行。主要目的是表征火焰结构和它的瞬态行为。为了实现这一目标,采取了自然发光的时间分辨的图像。发射的光通过记录其光谱内容和应用不同的过滤器来分离物物种如OH和CH的研究。成像是通过修改光纤接入卡车大小的引擎启用。被用于成像的加剧的数码相机。一些成像是使用条纹摄像机,能够在单个循环期间服用8张任意间隔的图片,从而可视化燃烧过程的进度来完成。所有成像用相似的操作条件下进行,并用作燃料正庚烷和异辛烷的混合物。上死点(TDC)前大约20个曲轴转角,被发现的冷火焰存在。他们似乎带着淡淡的结构,整个燃烧室内均匀分布。有没有记录的冷火焰的结束和主热释放的开始之间的亮度。 TDC周围的主要放热开始。纵观宏观尺度上,我们发现,充电开始在整个充电任意点同时燃烧。由于热边界层比散装的电荷的更冷,局部热释放靠近壁延迟。其结果是,总的热量释放速度将变慢。整体平均图像时对CAD绘图清楚地显示这堵墙边界效应。在主燃烧事件的峰强度的数量级大于所述冷焰中的一个顺序和结构是一个很大的突出。由于自发辐射成像是线的视线一个整合,火焰结构出现一比特模糊。微观尺度结构非常类似于从一个周期到另一个周期,但也有在宏观尺度周期之间的大的变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号