首页> 外文会议>Annual International Occupational Ergonomics and Safety Conference >The effects of work-related factors on one-handed pushing and pulling force capability in vertical directions
【24h】

The effects of work-related factors on one-handed pushing and pulling force capability in vertical directions

机译:工作相关因素对垂直方向单手推动和拉动力能力的影响

获取原文

摘要

The purpose of this study was to measure the maximai isometric strength and to investigate the effects of different handle-heights and elbow angles with respect to Mid. sagittal plane on the pushing and pulling strength in vertical direction. Eight male subjects performed a series of static strength measurements for each subject. The highest isometric strength was found in pulling at shoulder height (S.H.) (Mean = 60.29 lb., SD = 16.78 lb.) and the lowest isometric strength was found also in pulling at elbow height (E.H.) (Mean = 33.06 lb., SD = 6.56 lb.). Although the isometric strengths were higher at S.H than at E.H. for both activities, the maximal isometric strengths were compared statistically. ANOVA was performed. The results of the experiment revealed that there was a significant different between handle heights. However, there were 110 significant differences between angles and activities.
机译:本研究的目的是测量Maximai等距强度,并研究不同手柄高度和肘部角度相对于中间的影响。在推动和拉动强度的矢状平面在垂直方向上。八个男性受试者对每个受试者进行了一系列静态强度测量。在肩部高度(平均值= 60.29磅,Sd = 16.78磅)中,发现最高等距强度(平均值= 16.78磅)和最低等距强度也在拉动弯头高度(EH)(平均值= 33.06磅。, SD = 6.56磅)。虽然S.H的等距优于在e.h中的等轴优点较高。对于这两种活动,最大等距优异在统计上进行比较。 ANOVA进行了。实验结果揭示了手柄高度之间存在显着差异。但是,角度和活动之间存在110个显着差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号