首页> 外文会议>International conference on information processing in computer-assisted interventions >Ultrasound-Based Image Guidance for Robot-Assisted Laparoscopic Radical Prostatectomy: Initial in-vivo Results
【24h】

Ultrasound-Based Image Guidance for Robot-Assisted Laparoscopic Radical Prostatectomy: Initial in-vivo Results

机译:机器人辅助腹腔镜根治性前列腺切除术的基于超声的图像指导:体内初步结果

获取原文

摘要

This paper describes the initial clinical evaluation of a realtime ultrasound-based guidance system for robot-assisted laparoscopic radical prostatectomy (RALRP). The surgical procedure was performed on a live anaesthetized canine with a da Vinci SI robot. Intraoperative imaging was performed using a robotic transrectal ultrasound (TRUS) manipulator and a bi-plane TRUS transducer. Two registration methods were implemented and tested: (ⅰ)using specialized fiducials placed at the air-tissue boundary, 3D TRUS data were registered to the da Vinci stereo endoscope with an average TRE of 2.37 ± 1.06 mm, (ⅱ)using localizations of the da Vinci manipulator tips in 3D TRUS images, 3D TRUS data were registered to the kinematic frame of the da Vinci manipulators with average TRE of 1.88 ± 0.88 mm using manual tool tip localization, and average TRE of 2.68 ± 0.98 mm using an automatic tool tip localization algorithm. Registration time was consistently less than 2 minutes when performed by two experienced surgeons after limited learning. The location of the TRUS probe was remotely controlled through part of the procedure by a da Vinci tool, with the corresponding ultrasound images being displayed on the surgeon console using TilePro. Automatic tool tracking was achieved with angular accuracy of 1.65 ± 1.24 deg. This work demonstrates, for the first time, the in-vivo use of a robotically controlled TRUS probe calibrated to the da Vinci robot, and will allow the da Vinci tools to be tracked for safety and to be used as pointers for regions of interest to be imaged by ultrasound.
机译:本文介绍了基于实时超声引导系统的机器人辅助腹腔镜前列腺癌根治术(RALRP)的初步临床评估。手术过程是使用da Vinci SI机器人在麻醉的活犬上进行的。术中成像是使用机器人经直肠超声(TRUS)机械手和双平面TRUS换能器进行的。实施并测试了两种注册方法:(ⅰ)使用位于空气组织边界的专门基准,将3D TRUS数据注册到da Vinci立体内窥镜,平均TRE为2.37±1.06 mm,(ⅱ)使用使用手动工具刀尖定位将3D TRUS图像中的da Vinci机械手尖端,3D TRUS数据记录到da Vinci机械手的运动学框架中,平均TRE为1.88±0.88 mm,平均TRE为2.68±0.98 mm定位算法。由两名经验丰富的外科医生在学习受限后执行的注册时间始终少于2分钟。 TRUS探针的位置是通过da Vinci工具通过该过程的一部分进行远程控制的,相应的超声图像使用TilePro在外科医生控制台上显示。自动工具跟踪的角度精度为1.65±1.24度。这项工作首次证明了已在达芬奇机器人上校准的机器人控制的TRUS探针在体内的使用,并将允许追踪达芬奇工具的安全性并将其用作目标区域的指针。通过超声波成像。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号