...
首页> 外文期刊>Occupational ergonomics: The journal of the international society for occupational ergonomics and safety >Three-dimensional peak and cumulative L4/L5 spine loads and trunk postures during non-occupational tasks
【24h】

Three-dimensional peak and cumulative L4/L5 spine loads and trunk postures during non-occupational tasks

机译:非工作任务期间L3 / L5脊柱负荷的三维峰值和累积姿势

获取原文
获取原文并翻译 | 示例
           

摘要

Cumulative low back loading has been shown to be a risk factor for low back pain reporting in the workplace. Evaluation of tasks outside of work might offer insight into why workers continue to have low back pain and may report pain differentially even when doing the same job. This study utilized a video-based 3D posture sampling approach to document joint postures of 18 people over a 2-hour period while performing non-repetitive tasks in and around their own homes. A 3D rigid link segment model was used to calculate reaction forces and moments at L4/L5 and joint models were used to calculate joint forces. Average peak (4.0 kN) and cumulative (9.9 MN·s) compression force estimates indicate significant loads on the low back occur during non-occupational tasks, despite the fact that participants spent most of their time (86.2%) in neutral trunk postures. Cumulative anterior reaction shear force (440 kN·s) was found to be comparable to those documented for a wide variety of occupational tasks, when extrapolated to an 8-hour shift. To our knowledge, this study is the first to include a full complement of 3D low back forces and moments, in conjunction with an assessment of trunk posture, for non-occupational activities. The evidence suggests that considering 3D peak and cumulative low back loading during non-occupational tasks is warranted and may help to explain some of the variability in the reporting of workplace-related low back disorders despite extensive ergonomic intervention.
机译:累积的腰背负荷已被证明是在工作场所报告腰痛的危险因素。评估工作以外的工作可能会提供洞察力,以了解为什么工人继续腰痛,甚至在从事相同工作时也可能会报告不同的疼痛。这项研究采用了基于视频的3D姿势采样方法,记录了两个小时内18个人的关节姿势,同时在自己的房屋内外执行非重复性任务。使用3D刚性链节模型来计算反作用力和L4 / L5力矩,并使用关节模型来计算关节力。平均峰值(4.0 kN)和累积(9.9 MN·s)的压缩力估计值表明,在非职业性任务中,尽管参与者大部分时间(86.2%)处于中立的躯干姿势,但腰背却承受了较大的载荷。当推算为8小时班次时,发现累积的前反应剪切力(440 kN·s)与针对各种职业任务所记录的那些相当。据我们所知,这项研究是第一个针对非职业活动全面结合3D下背部力量和力矩以及对躯干姿势进行评估的研究。有证据表明,在非职业任务中考虑3D峰值和累积的下背部负荷是必要的,尽管有大量的人体工程学干预措施,但仍可能有助于解释与工作场所相关的下背部疾病的报告中的某些变异性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号