首页> 外文期刊>Landslides >Landslides triggered by slipping-fault-generated earthquake on a plateau: an example of the 14 April 2010, Ms 7.1, Yushu, China earthquake
【24h】

Landslides triggered by slipping-fault-generated earthquake on a plateau: an example of the 14 April 2010, Ms 7.1, Yushu, China earthquake

机译:高原滑坡断裂地震引发的滑坡:以2010年4月14日中国玉树7.1级地震为例

获取原文
获取原文并翻译 | 示例
           

摘要

On 14 April 2010 at 07:49 (Beijing time), a catastrophic earthquake with Ms 7.1 struck Yushu County, Qinghai Province, China. A total of 2,036 landslides were interpreted from aerial photographs and satellite images, verified by selected field checking. These landslides cover about a total area of 1.194km~2. The characteristics and failure mechanisms of these landslides are presented in this paper. The spatial distribution of the landslides is evidently strongly controlled by the locations of the main coseismic surface fault ruptures. The landslides commonly occurred close together. Most of the landslides are small; there were only 275 individual landslide (13.5% of the total number) surface areas larger than 1,000m2. The landslides are of various types. They are mainly shallow, disrupted landslides, but also include rock falls, deep-seated landslides, liquefaction-induced landslides, and compound landslides. Four types of factors are identified as contributing to failure along with the strong ground shaking: natural excavation of the toes of slopes, which mean erosion of the base of the slope, surface water infiltration into slopes, co-seismic fault slipping at landslide sites, and delayed occurrence of landslides due to snow melt or rainfall infiltration at sites where slopes were weakened by the co-seismic ground shaking. To analyze the spatial distribution of the landslides, the landslide area percentage (LAP) and landslide number density (LND) were compared with peak ground acceleration (PGA), distance from co-seismic main surface fault ruptures, elevation, slope gradient, slope aspect, and lithology. The results show landslide occurrence is strongly controlled by proximity to the main surface fault ruptures, with most landslides occurring within 2.5km of such ruptures. There is no evident correlation between landslide occurrences and PGA. Both LAP and LND have strongly positive correlations with slope gradient, and additionally, sites at elevations between 3,800 and 4,000m are relatively susceptible to landslide occurrence; as are slopes with northeast, east, and southeast slope aspects. Q_4al-pl, N, and T_3kn~1 have more concentrated landslide activity than others. This paper provides a detailed inventory map of landslides triggered by the 2010 Yushu earthquake for future seismic landslide hazard analysis and also provides a study case of characteristics, failure mechanisms, and spatial distribution of landslides triggered by slippingfault generated earthquake on a plateau.
机译:北京时间2010年4月14日晚上7:49,中国青海省玉树县发生7.1级地震。通过航拍照片和卫星图像解释了总共2,036个滑坡,并通过选定的野外检查进行了验证。这些滑坡总面积约1.194km〜2。介绍了这些滑坡的特征和破坏机理。滑坡的空间分布显然受到主要同震表面断层破裂位置的控制。滑坡通常发生在附近。大多数滑坡很小。只有275个大于1000平方米的滑坡(占总数的13.5%)。滑坡有各种类型。它们主要是浅的,破裂的滑坡,但也包括岩石崩塌,深层滑坡,液化引起的滑坡和复合滑坡。四种类型的因素被认为是伴随强烈的地面震动而导致破坏的因素:斜坡的脚趾自然开挖,这意味着斜坡底部的侵蚀,地表水渗透到斜坡中,滑坡现场的同震断层滑动,以及由于同震地面震动而使边坡减弱的地点,由于融雪或降雨渗透而导致的滑坡延迟发生。为了分析滑坡的空间分布,将滑坡面积百分比(LAP)和滑坡数量密度(LND)与峰值地面加速度(PGA),距同震主表面断层破裂的距离,标高,坡度,坡度等进行了比较。和岩性。结果表明,滑坡的发生受靠近主表层断裂的强烈控制,大多数滑坡发生在距断裂面2.5km的范围内。滑坡发生与PGA之间没有明显的相关性。 LAP和LND都与坡度具有极强的正相关性,此外,海拔3,800至4,000m的地点相对容易发生滑坡。以及具有东北,东和东南坡度方面的坡度。 Q_4al-pl,N和T_3kn〜1具有比其他更为集中的滑坡活动。本文提供了一份详细的2010年玉树地震引发的滑坡清单图,以用于未来的地震滑坡灾害分析,并提供了一个研究案例,研究了滑坡断层地震在高原上引发的滑坡的特征,破坏机制和空间分布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号