Effect of cyclic loading on the residual strength of over-consolidated silty clay in a ring shear test

摘要

In this paper, the effect of cyclic loading on drained residual strength of over-consolidated silty clay is examined based on the results from ring shear tests which were conducted with a sophisticated ring shear apparatus. Initially sheared to form shear zones under different pre-consolidation pressures and at different shear rates (SRs), soil samples were then tested under cyclic loading. After the cyclic loading application, the samples were re-sheared while the corresponding shear strengths were measured. The results show that the effect of cyclic loading on residual strength is noticeable. The effect is related to pre-consolidation history and SR of the soil samples. Under conditions of relatively low over-consolidation ratio (OCR), the soil samples show an increase in residual strength with decreasing SR after cyclic loading. Most of the peak strength values after cyclic loading are higher than the residual strength values obtained before cyclic loading. Two effects of cyclic loading on the residual strength are identified: (a) If OCR is less than or equal to 3.0, the residual strengths measured after cyclic loading are larger than those before cyclic loading; (b) If OCR is greater than or equal to 3.5, the residual strengths after cyclic loading tend to become lower than those in the shear tests before cyclic loading.