...
首页> 外文期刊>Laser and Particle Beams >Interferometric investigations of influence of target irradiation on the parameters of laser-produced plasma jets
【24h】

Interferometric investigations of influence of target irradiation on the parameters of laser-produced plasma jets

机译:干涉测量对目标辐照对激光产生等离子体射流参数的影响的研究

获取原文
获取原文并翻译 | 示例
           

摘要

Our recent experimental results demonstrate that the formation of plasma jets is a fundamental process accompanying the laser produced plasma expansion, if a massive planar target with relatively high atomic number is irradiated by a defocused laser beam. In this paper some new results on the influence of target irradiation conditions on plasma jet parameters are presented. The experiment was carried out at the PALS iodine laser facility, with the third harmonic beam of the pulse duration of 250 ps (FWHM). The beam energies varied in the range of 13-160 J, the focal spot radii in the range of 35-600 mu m. The planar massive targets used in the experiment were made of Cu, Ag and Ta. For measurements of the electron density evolution a three frame interferometric system was employed. The jets were observed in the whole range of the laser energy used. The initial velocities of the plasma jets produced in the reported experiment reached the value of up to 7.10(7) cm/S, the jets were up to 4 turn long including the jet pedestal and about 400 mu m in diameter. Calculations of the efficiency of the plasma jet production show that it decreases with increasing the laser energy.
机译:我们最近的实验结果表明,如果散焦的激光束照射具有较高原子序数的大型平面靶,则等离子体射流的形成是伴随激光产生的等离子体膨胀的基本过程。本文提出了一些新的结果,这些结果对目标辐照条件对等离子体射流参数的影响产生了影响。实验是在PALS碘激光设备上进行的,脉冲持续时间为250 ps(FWHM)的三次谐波光束。束能量在13-160 J的范围内变化,焦点半径在35-600μm的范围内。实验中使用的平面块状靶由Cu,Ag和Ta制成。为了测量电子密度的变化,采用了三帧干涉系统。在所使用的激光能量的整个范围内都观察到了射流。在所报告的实验中产生的等离子流的初始速度达到了最高7.10(7)cm / S的值,包括喷射器基座在内的喷射流长达4圈,直径约为400微米。对等离子流产生效率的计算表明,它随着激光能量的增加而降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号