...
首页> 外文期刊>European Journal of Nuclear Medicine and Molecular Imaging >The influence of photon depth of interaction and non-collinear spread of annihilation photons on PET image spatial resolution.
【24h】

The influence of photon depth of interaction and non-collinear spread of annihilation photons on PET image spatial resolution.

机译:相互作用的光子深度和an灭光子的非共线扩散对PET图像空间分辨率的影响。

获取原文
获取原文并翻译 | 示例
           

摘要

PURPOSE: The quality of PET imaging is impaired by parallax errors. These errors produce misalignment between the projected location of the true origin of the annihilation event and the line of response determined by the coincidence detection system. Parallax errors are due to the varying depths of photon interaction (DOI) within the scintillator and the non-collinear (NC) emission of the annihilation photons. The aim of this work was to address the problems associated with the DOI and the NC spread of annihilation photons and to develop a quantitative model to assess their impact on image spatial resolution losses for various commonly used scintillators and PET geometries. METHODS: A theoretical model based on Monte Carlo simulations was developed to assess the relative influence of DOI and the NC spread of annihilation photons on PET spatial resolution for various scintillator materials (BGO, LSO, LuAP, GSO, NaI) and PET geometries. RESULTS: The results demonstrate good agreement between simulated, experimental and published overall spatial resolution for some commercial systems, with maximum differences around 1 mm in both 2D and 3D mode. The DOI introduces an impairment of non-stationary spatial resolution along the radial direction, which can be very severe at peripheral positions. As an example, the radial spatial resolution loss due to DOI increased from 1.3 mm at the centre to 6.7 mm at 20 cm from the centre of a BGO camera with a 412-mm radius in 2D mode. Including the NC, the corresponding losses were 3.0 mm at the centre and 7.3 mm 20 cm from the centre. CONCLUSION: Without a DOI detection technique, it seems difficult to improve PET spatial resolution and increase sensitivity by reducing the detector ring radius or by extending the detector in the axial direction. Much effort is expended on the design and configuration of smaller detector elements but more effort should be devoted to the DOI complexity.
机译:目的:视差错误会影响PET成像的质量。这些错误会导致the灭事件的真实起点的预计位置与由重合检测系统确定的响应线之间产生偏差。视差误差是由于闪烁体中光子相互作用(DOI)的深度不同以及an灭光子的非共线(NC)发射引起的。这项工作的目的是解决与the灭光子的DOI和NC扩散相关的问题,并开发一种定量模型来评估其对各种常用闪烁体和PET几何形状对图像空间分辨率损失的影响。方法:建立了基于蒙特卡洛模拟的理论模型,以评估DOI和an灭光子的NC扩散对各种闪烁体材料(BGO,LSO,LuAP,GSO,NaI)和PET几何形状的PET空间分辨率的相对影响。结果:结果表明,对于某些商业系统,模拟,实验和已发布的总体空间分辨率之间具有良好的一致性,在2D和3D模式下,最大空间差异约为1 mm。 DOI沿径向方向引入了不稳定的空间分辨率,这在外围位置会非常严重。例如,在2D模式下,由于DOI引起的径向空间分辨率损失从中心处的1.3 mm增加到距半径为412 mm的BGO摄像机中心20 cm处的6.7 mm。包括NC,相应的损耗在中心为3.0毫米,而距中心20厘米为7.3毫米。结论:如果没有DOI检测技术,似乎很难通过减小检测器环半径或在轴向方向上延伸检测器来提高PET空间分辨率并提高灵敏度。在较小的检测器元件的设计和配置上花费了很多精力,但是应该将更多的精力投入到DOI复杂性上。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号