首页> 外文期刊>International Journal of Minerals,Metallurgy and Materials >Thermodynamics and kinetics of extracting zinc from zinc oxide ore by the ammonium sulfate roasting method
【24h】

Thermodynamics and kinetics of extracting zinc from zinc oxide ore by the ammonium sulfate roasting method

机译:硫酸铵焙烧法从氧化锌矿中提取锌的热力学和动力学

获取原文
获取原文并翻译 | 示例
           

摘要

Thermodynamic analyses and kinetic studies were performed on zinc oxide ore treatment by (NH4)(2)SO4 roasting technology. The results show that it is theoretically feasible to realize a roasting reaction between the zinc oxide ore and (NH4)(2)SO4 in a temperature range of 573-723 K. The effects of reaction temperature and particle size on the extraction rate of zinc were also examined. It is found that a surface chemical reaction is the rate-controlling step in roasting kinetics. The calculated activation energy of this process is about 45.57 kJ/mol, and the kinetic model can be expressed as follows: 1 - (1 - alpha)(1/3) = 30.85 exp(-45.57/RT)center dot t. An extraction ratio of zinc as high as 92% could be achieved under the optimum conditions.
机译:通过(NH4)(2)SO4焙烧技术对氧化锌矿石进行了热力学分析和动力学研究。结果表明,在573-723 K的温度范围内实现氧化锌矿石与(NH4)(2)SO4的焙烧反应在理论上是可行的。反应温度和粒径对锌提取率的影响还进行了检查。发现表面化学反应是焙烧动力学中的速率控制步骤。计算出的该过程的活化能约为45.57 kJ / mol,动力学模型可以表示为:1-(1-α)(1/3)= 30.85 exp(-45.57 / RT)中心点t。在最佳条件下,锌的提取率可达到92%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号