首页> 外文期刊>International Journal of Fracture >Mixed mode crack in a periodically-layered composite
【24h】

Mixed mode crack in a periodically-layered composite

机译:周期性分层复合材料中的混合模式裂纹

获取原文
获取原文并翻译 | 示例
           

摘要

The problem on a crack in a bimaterial periodically-layered composite is considered. The single finite length crack parallel to the interfaces is loaded by normal opening tractions but the fracture mode is she mixed one as a result of non-symmetric crack location within the layer. The crack is presented as distributed dislocations with unknown density and the problem is reduced to a system of singular integral equations of the first kind. The coefficients of the system are derived from the application of the Green function for a single dislocation which is obtained in a closed form with the help of the representative cell approach. The dependence of the stress intensity factors K_I and K_(II) upon the geometric and elastic mismatch parameters is examined. The numerical study allowed to point out the cases in which the simplified sandwich model can be employed for the analysis. On the other hand, for the case of very thin and stiff non-cracked layers essentially dissimilar behavior of the stress intensity factors was revealed. In particular, we discovered that K_(II) may vanish not only for the symmetric crack position in the midplane of the layer but also in several additional ones. For some limiting cases the solution is seen to coincide with known results.
机译:考虑了双材料周期性层合复合材料中的裂纹问题。平行于界面的单个有限长度裂纹是通过正常的开口牵引力加载的,但由于层中裂纹位置不对称,导致断裂模式混合在一起。裂纹以未知密度的分布位错的形式出现,并将问题简化为第一种奇异积分方程组。该系统的系数是从Green函数的应用得出的,该Green函数是通过具有代表性的单元方法以封闭形式获得的单个位错。检查了应力强度因子K_I和K_(II)对几何和弹性失配参数的依赖性。数值研究指出了可以使用简化三明治模型进行分析的情况。另一方面,对于非常薄且坚硬的非裂纹层而言,应力强度因子的行为基本不同。特别是,我们发现K_(II)不仅对于层中平面中对称的裂纹位置可能消失,而且在其他几个裂纹中也可能消失。在某些极限情况下,该解决方案被视为与已知结果一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号