首页> 外文期刊>ACS applied materials & interfaces >Conductivity Enhancement of PEDOT:PSS Films via Phosphoric Acid Treatment for Flexible All-Plastic Solar Cells
【24h】

Conductivity Enhancement of PEDOT:PSS Films via Phosphoric Acid Treatment for Flexible All-Plastic Solar Cells

机译:磷酸处理柔性全塑料太阳能电池提高PEDOT:PSS薄膜的电导率

获取原文
获取原文并翻译 | 示例
           

摘要

Highly conductive polymer films on plastic substrates are desirable for the application of flexible electronics. Here, we report the conductivity of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) can be enhanced to 1460 S/cm via phosphoric acid (H3PO4) treatment. The conductivity enhancement is associated with the partial removal of PSS from the film. The H3PO4 treatment is compatible with plastic substrates, while sulfuric acid (H2SO4) can easily damage the plastic substrate. With the flexible electrode of poly(ether sulfone) (PES)/H3PO4-treated PEDOT:PSS, we have demonstrated flexible all-plastic solar cells (PES/H3PO4-treated PEDOT:PSS/PEI/P3HT:ICBA/EG-PEDOT:PSS). The cells exhibit an open-circuit voltage of 0.84 V, a fill factor of 0.60, and a power conversion efficiency of 3.3% under 100 mW/cm(2) white light illumination.
机译:对于柔性电子设备的应用,在塑料基板上的高导电聚合物膜是理想的。在这里,我们报告了聚(3,4-乙撑二氧噻吩)的电导率:聚(苯乙烯磺酸盐)(PEDOT:PSS)可以通过磷酸(H3PO4)处理提高到1460 S / cm。电导率的提高与膜中PSS的部分去除有关。 H3PO4处理与塑料基板兼容,而硫酸(H2SO4)则很容易损坏塑料基板。使用聚醚砜(PES)/ H3PO4处理的PEDOT:PSS的柔性电极,我们已经展示了柔性全塑料太阳能电池(PES / H3PO4处理的PEDOT:PSS / PEI / P3HT:ICBA / EG-PEDOT: PSS)。电池在100 mW / cm(2)白光照射下表现出0.84 V的开路电压,0.60的填充系数和3.3%的功率转换效率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号