...
首页> 外文期刊>Journal of the mechanical behavior of biomedical materials >Measurement of the shear modulus in thin-layered tissues using numerical simulations and shear wave elastography
【24h】

Measurement of the shear modulus in thin-layered tissues using numerical simulations and shear wave elastography

机译:使用数值模拟和剪切波弹性造影测量薄层组织中的剪切模量

获取原文
获取原文并翻译 | 示例
           

摘要

Measurement of mechanical properties of thin-layered tissues has broad applications in the diagnosis of several pathologies. Ultrasound shear wave elastography (SWE) measures the shear wave speed as a means of estimating the mechanical properties of tissues. However, the wave speed in thin-layered tissues is affected by their thickness and the properties of surrounding tissues. The objective of this study is to introduce a method that combines numerical simulations and SWE measurements to provide a more accurate calculation of shear modulus in layered tissues. In the proposed method, the spatial distribution of the acoustic radiation force (ARF) emitted by the transducer was first computed. The ARF was then used as input for simulating the guided wave propagation in the thin layer with its surroundings. The simulations were repeated for several values of the shear modulus of the layer to obtain the corresponding simulated wave speed. By comparing the measured and simulated wave speeds, a more accurate (corrected) shear modulus can be obtained. The proposed method was validated using experiments in agarose gels. In-vivo SWE measurements were also performed for the fascia of the tibialis anterior (TA) muscle and the aponeurosis of musculotendinous junction (MTJ) in medial gastrocnemius (MG) head in a group of healthy individuals. The simulated and measured wave speed in gel constructs were in good agreement with a maximum error of 7.22%. The average of measured wave speed of fascia and aponeurosis was 3.90 +/- 0.16 m/s and 2.33 +/- 0.60 m/s, while the corresponding corrected shear modulus was 95.63 +/- 17.89 kPa and 6.36 +/- 8.98 kPa, respectively. Thickness had a substantial effect on the wave speed in thin-layered tissues with decreasing speed for thinner tissues. The SWE-based simulation method presented in this study has the potential of enhancing clinical assessment for several musculoskeletal conditions involving thin-layered tissues.
机译:薄层组织的力学性能测量在诊断若干病理学中具有广泛的应用。超声剪切波形弹性造影(SWE)测量剪切波速作为估计组织机械性能的手段。然而,薄层组织中的波速受其厚度和周围组织的性质的影响。本研究的目的是介绍一种结合数值模拟和SWE测量的方法,以便在层状组织中提供更准确的剪切模量计算。在所提出的方法中,首先计算由换能器发出的声学辐射力(ARF)的空间分布。然后将ARF用作模拟薄层中的引导波传播的输入。对层的剪切模量的若干值重复模拟以获得相应的模拟波速。通过比较测量和模拟波速,可以获得更精确的(校正的)剪切模量。使用琼脂糖凝胶中的实验验证所提出的方法。在一组健康个体中,还对胫骨前(TA)肌肉和肌肉肌肉(MTJ)头部的肌肉抑制(MTJ)的腱膜(MTJ)的腱膜骨折进行了体内SWE测量。凝胶构建体中的模拟和测量波速与最大误差为7.22%。筋膜和腱膜的测量波速的平均值为3.90 +/- 0.16 m / s和2.33 +/- 0.60 m / s,而相应的校正剪切模量为95.63 +/- 17.89 kPa和6.36 +/- 8.98 KPA,分别。厚度对薄层组织中的波速具有显着影响,较薄的组织的速度降低。本研究中提出的基于SWE的模拟方法具有提高涉及薄层组织的几种肌肉骨骼病症的临床评估。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号