Design and application of a novel patient-specific 3D printed drill navigational guiding template in percutaneous thoracolumbar pedicle screw fixation: A cadaveric study

摘要

The conventional surgical method of percutaneous pedicle screw fixation (PPSF) mainly uses X-ray fluoroscopy guidance to target the vertebral pedicle for screw placement. This study aimed to explore the feasibility of establishing a personalized drill guide template for PPSF based on a three-dimensional (3D) printing technique and to evaluate the accuracy and safety of the method for assisting screw insertion in cadaveric specimens. The T3-L3 trunk cadaveric specimens from six adults were subject to a computed tomography (CT) scan in the prone position. A three-dimensional model containing the back skin contour was reconstructed. A bilateral ideal pedicle screw in the T6-L1 segment was designed. Then, the reverse templates were designed. The two templates were fused and printed into an individualized guide template. PPSF was performed under the assistance of the guide template, and the CT scan was taken postoperatively to access the screw position. Ninety-six pedicle screws were successfully placed on the bilateral vertebral body of the T6-L1 segment with the assistance of a guide template. The guide plate was not loosened or displaced when operated by a single hand, and the operation time was 24.6 +/- 7.9 s. The axial CT images after puncture indicated that in 96 puncture needles, 90 needles were grade I and 6 were grade II, with a puncture accuracy rate of 98.6%. In conclusion, an individualized PPSF navigation template was developed using Mimics software and 3D printing prototyping, which improved the accuracy of PPSF in cadaveric specimens. (C) 2020 Elsevier Ltd. All rights reserved.