首页> 外文期刊>Polymer Composites >Synthesis of a novel polysiloxane containing phosphorus, and boron and its effect on flame retardancy, mechanical, and thermal properties of epoxy resin
【24h】

Synthesis of a novel polysiloxane containing phosphorus, and boron and its effect on flame retardancy, mechanical, and thermal properties of epoxy resin

机译:合成含磷的新型聚硅氧烷,硼及其对环氧树脂的阻燃性,机械和热性能的影响及其影响

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, a novel polysiloxane containing phosphorus and boron (PSPB) has been successfully synthesized. The chemical structure of PSPB was characterized by means of FT-IR, XRD, and NMR. The resulted PSPB was used as flame retardant and incorporated into the epoxy (EP) resin to prepare PSPB/EP composites. The effect of PSPB content on the mechanical properties, thermal stability and flame retardancy of composites was studied by impact and bending test, TGA, DMA, and limiting oxygen index (LOI) test. The results revealed that the incorporation of PSPB increased the mechanical properties and thermal stability of composites. The glass transition temperature (T-g) of the composites was decreased with the increasing of PSPB content. The morphology of the fracture surface of PSPB/EP composites was studied by SEM, indicating that the PSPB had good compatibility with epoxy resin. Moreover, the LOI results indicated that the incorporation of PSPB could significantly enhance the flame retardancy of composites. The LOI value of PSPB/EP composites with 20 wt% PSPB was about 28.4%, whereas the neat epoxy resin had a LOI of 20.8%. POLYM. COMPOS., 39:807-814, 2018. (c) 2016 Society of Plastics Engineers
机译:本文已成功地合成了含有磷和硼(PSPB)的新型聚硅氧烷。 PSPB的化学结构的特征在于FT-IR,XRD和NMR。得到的PSPB用作阻燃剂并掺入环氧树脂(EP)树脂中以制备PSPB / EP复合材料。通过冲击和弯曲试验,TGA,DMA和限制氧指数(LOI)测试,研究了PSPB含量对复合材料的机械性能,热稳定性和阻燃性的影响。结果表明,CLPB的掺入增加了复合材料的机械性能和热稳定性。随着PSPB含量的增加,复合材料的玻璃化转变温度(T-G)降低。通过SEM研究了PSPB / EP复合材料的断裂表面的形态,表明PSPB与环氧树脂具有良好的相容性。此外,LOI结果表明PSPB的掺入可以显着提高复合材料的阻燃性。具有20wt%PSPB的PSPB / EP复合材料的LOI值约为28.4%,而整齐的环氧树脂的LOI为20.8%。聚合物。 Compos。,39:807-814,2018。(c)2016塑料工程师协会

著录项

  • 来源
    《Polymer Composites》 |2018年第3期|共8页
  • 作者单位

    Nanchang Hangkong Univ Sch Mat Sci &

    Engn Nanchang 330063 Jiangxi Peoples R China;

    Nanchang Hangkong Univ Sch Mat Sci &

    Engn Nanchang 330063 Jiangxi Peoples R China;

    Nanchang Hangkong Univ Sch Mat Sci &

    Engn Nanchang 330063 Jiangxi Peoples R China;

    Nanchang Hangkong Univ Sch Mat Sci &

    Engn Nanchang 330063 Jiangxi Peoples R China;

    Nanchang Hangkong Univ Sch Mat Sci &

    Engn Nanchang 330063 Jiangxi Peoples R China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 增强塑料、填充塑料;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号