首页> 外文期刊>Polymer Composites >Investigating mechanical, dielectric, and electromagnetic interference shielding properties of polymer blends and three component hybrid composites based on polyvinyl alcohol, polyaniline, and few layer graphene
【24h】

Investigating mechanical, dielectric, and electromagnetic interference shielding properties of polymer blends and three component hybrid composites based on polyvinyl alcohol, polyaniline, and few layer graphene

机译:基于聚乙烯醇,聚苯胺和少数层石墨烯研究聚合物共混物和三种组分杂化复合材料的机械,电介质和电磁干扰屏蔽性能

获取原文
获取原文并翻译 | 示例
           

摘要

To achieve the suitable set of synergistic mechanical, dielectric, and electromagnetic interference shielding properties, polymer blends based on varying the concentration of conductive polymer polyaniline (PANI) in insulative matrix of polyvinyl alcohol (PVA) as well as hybrid composites by adding few layer graphene (FLG) in PVA/PANI polymer blends are prepared using solution casting method. In PVA/PANI blends, by increasing the concentration of PANI, dielectric constant (epsilon), dielectric loss (epsilon), and total shielding efficiency (SET) of PVA are enhanced from 4 to 80, 0.72 to 164, and 2.5 to 30 dB at 100 Hz, respectively, at the considerable loss of its mechanical properties particularly the tensile strength from 23.9 to 8.5 MPa. For hybrid composites of PVA/PANI/FLG, mechanical as well as dielectric and EMI shielding properties are remarkably enhanced at very low loading levels of FLG. The incorporation of small amounts of FLG in PVA/PANI-10 wt%, the epsilon, epsilon, and SET are increased from 4 to 7,907, 0.5 to 406,947.5 and 2.5 to 99 dB at 100 Hz, respectively, along with the considerable increase in the mechanical properties such as tensile strength from 15.7 to 36.3 MPa and modulus from 0.1 to 0.96 GPa at the loss of strain. In comparison to PVA/PANI blends, hybrid composites of PVA/PANI/FLG become a promising system for microwave absorption applications. POLYM. COMPOS., 39:3686-3695, 2018. (c) 2017 Society of Plastics Engineers
机译:为了实现合适的协同机械,电介质和电磁干扰屏蔽性能,基于在聚乙烯醇(PVA)绝缘基质中的导电聚合物聚苯胺(PANI)的浓度以及通过添加几层石墨烯来改变导电聚合物聚苯胺(PANI)的浓度(FLG)在PVA / PANI聚合物共混物中使用溶液浇铸方法制备。在PVA / PANI混合物中,通过增加PANI的浓度,介电常数(ε),介电损耗(ε)和PVA的总屏蔽效率(SET)从4到80,0.72至164和2.5至30 dB增强在100Hz分别在其机械性能的相当大的损失,特别是从23.9至8.5MPa的拉伸强度。对于PVA / PANI / FLG的混合复合材料,在非常低的装载水平的FLG下显着提高了机械以及电介质和EMI屏蔽性能。在PVA / PANI-10wt%,ε,ε和设定中掺入少量FLG,分别从4-7,907,0.5至406,947.5和2.5至99dB分别在100 Hz上增加,以及相当大的增加在菌株损失时,机械性能如15.7至36.3MPa的拉伸强度为0.1至0.96GPa。与PVA / PANI混合物相比,PVA / PANI / FLG的混合复合材料成为微波吸收应用的有希望的系统。聚合物。 Compos。,39:3686-3695,2018。(c)2017塑料工程师协会

著录项

  • 来源
    《Polymer Composites》 |2018年第10期|共10页
  • 作者单位

    Natl Univ Sci &

    Technol Sch Chem &

    Mat Engn Sect H-12 Islamabad 44000 Pakistan;

    Natl Univ Sci &

    Technol Sch Chem &

    Mat Engn Sect H-12 Islamabad 44000 Pakistan;

    Natl Univ Sci &

    Technol Sch Chem &

    Mat Engn Sect H-12 Islamabad 44000 Pakistan;

    Natl Univ Sci &

    Technol Sch Chem &

    Mat Engn Sect H-12 Islamabad 44000 Pakistan;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 增强塑料、填充塑料;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号