...
首页> 外文期刊>Russian journal of physical chemistry, B. >Role of Structural Stresses in the Thermodestruction of Supercoiled Cellulose Macromolecules after Nitration
【24h】

Role of Structural Stresses in the Thermodestruction of Supercoiled Cellulose Macromolecules after Nitration

机译:结构应力在硝化后超纤维纤维素大分子热量的作用

获取原文
获取原文并翻译 | 示例
           

摘要

Thermogravimetry is used to study the thermodestruction of nitrocellulose (NC) with various nitrogen contents at various heating rates. At high degrees of nitration and high heating rates of the sample, the reaction occurs in an explosion mode with a threshold of its weight loss depending on the temperature. To explain this behavior, it is assumed that the nitration of cellulose gives rise to structural stresses, which weaken the covalent bonds in it by ~37 kJ/mol (at a nitrogen content of ~13%). This process apparently involves two different mechanisms of weight loss during heating: (a) conventional thermal destruction of NC macromolecules through the rupture of covalent bonds (with k ~(0)= 10_(13)s_(?1), E = 150.2 kJ/mol, and n = 1) at heating rates of up to 10 K/min and nitrogen content in NC of up to 9%; (b) Zhurkov’s thermofluctuational mechanism of the destruction of strained macromolecules, characterized by a sharp (threshold) dependence of the weight loss on the heating rate, which is operative at heating rates above ~4 K/min and high (>13%) nitrogen contents and at 20 K/min and a low (~9%) nitrogen content. Under conditions of rapid heating, ~10–20 K/min, the work done by stressed states to overcome the potential barrier to the rupture of covalent bonds causes an increase in the decomposition rate by a factor of 2000. The observed threshold pattern of weight loss during the thermodestruction of NC explains the long-known critical dependence of the properties of NC used to manufacture propellants on small changes in the nitrogen content.
机译:热重试剂用于研究各种氮含量的硝酸纤维素(NC)的热脱模,以各种加热速率。在样品的高硝化度和高加热速率下,反应发生在爆炸模式中,其重量损失的阈值取决于温度。为了解释这种行为,假设纤维素的硝化产生结构应力,其使其中的共价键〜37kJ / mol(以〜13%的氮含量)削弱。该过程显然涉及加热期间的两种不同的体重损失机制:(a)通过共价键的破裂(用K〜(0)= 10_(13)S _(α1),e = 150.2 kJ / mol,n = 1)在加热速率下,高达10k / min,Nc的氮含量高达9%; (b)Zhurkov对应变大分子的破坏的热化机理,其特征在于加热速率对重量损失的尖锐(阈值)依赖性,其在高于〜4k / min和高(> 13%)氮的加热速率下进行操作内容物和20k / min,低(〜9%)氮含量。在快速加热的条件下,〜10-20 k / min,由强调状态克服潜在屏障对共价键的破裂的潜在屏障导致分解率的增加2000年。观察到的重量阈值模式NC热脱模期间的损失解释了NC的性质用于制造推进剂的长期以来的关键依赖性在氮含量的小变化上。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号