In vitro evaluation of bilayer membranes of PLGA/hydroxyapatite/beta-tricalcium phosphate for guided bone regeneration

摘要

Membranes for guided bone regeneration represent valuable resources, preventing fibroblast infiltration and aiding anatomical bone reconstruction. Nonetheless, available membranes lack bone regenerative capacity, suitable mechanical behavior, or adequate degradation profile. Therefore, to overcome these limitations, this study developed bilayer membranes with a dense layer (dry phase inversion) of PLGA (poly(lactic-co-glycolic acid)):HAp (hydroxyapatite) - 95:05 (wt%) - and an electrospun layer of PLGA and HAp:beta-TCP (beta-tricalcium phosphate) with ratios of 60:40, 70:30 and 85:15 (wt%), evaluating its mechanical, morphological and in vitro properties. The bilayer membranes displayed adequate interlayer adhesion, dense layer pore size of 4.20 mu m and electrospun layer with porosity degree of 38.2%, thus capable of preventing fibroblast infiltration while allowing osteoblast migration and nutrient permeation. They also showed T-g of 82 degrees C and higher storage modulus, which was constant up to 54.6 degrees C, characteristics important for membrane implantation and use with no mechanical compromise. In vitro degradation mass loss was only 10% after 60 days, a profile suitable for the application requirement. Membranes with calcium phosphates had better osteoblast attachment, proliferation and migration. Taken together, results indicate the great potential of PLGA/HAp/beta-TCP bilayer membranes on bone reconstruction with proper degradation profile, morphology, mechanical behavior and bone regenerative capacity.