...
首页> 外文期刊>Advances in Applied Ceramics >Phosphoric acid treated AlN powder for aqueous processing of net-shape dense AlN and beta-SiAlON parts
【24h】

Phosphoric acid treated AlN powder for aqueous processing of net-shape dense AlN and beta-SiAlON parts

机译:磷酸处理的AlN粉末,用于净形致密AlN和β-SiAlON零件的水处理

获取原文
获取原文并翻译 | 示例
           

摘要

Due to fast hydrolysis of AlN when in contact with water, AlN based ceramics are processed in organic solvents, which are volatile, expensive, harmful to the health and environment. The present work intends to protect AlN powder against hydrolysis in order to enable aqueous processing of AIN based ceramics. A commercial AlN powder was treated in an ethanol solution of H_3PO_4 and Al(H_2PO_4)_3 kept at 80 deg C for 24 h to protect it from hydrolysis. The dispersing behaviour of the treated AlN powder in water and the ability to consolidate defect free parts of AlN and beta-Si_4Al_2O_2N_6 ceramics from aqueous suspensions by slip casting and gelcasting techniques were studied. The consolidated parts were then sintered in a graphite furnace and the sintered bodies exhibited properties [bulk density (BD), apparent porosity (AP), crystalline phase composition and microstructural features] similar to those reported in literature for the same materials processed from organic media.
机译:由于AlN与水接触时会迅速水解,因此AlN基陶瓷在有机溶剂中加工,该溶剂易挥发,价格昂贵,对健康和环境有害。本发明旨在保护AlN粉末免于水解,以便能够对AIN基陶瓷进行水处理。将商品化的AlN粉末在H_3PO_4和Al(H_2PO_4)_3的乙醇溶液中保持80摄氏度的温度处理24小时,以防止其水解。研究了处理后的AlN粉末在水中的分散行为以及通过滑模铸造和凝胶浇铸技术从水性悬浮液中固结AlN和β-Si_4Al_2O_2N_6陶瓷的无缺陷部分的能力。然后,将固结的零件在石墨炉中进行烧结,其烧结体表现出的特性[堆积密度(BD),表观孔隙率(AP),结晶相组成和微观结构特征]与文献报道的那些使用有机介质加工的相同材料相似。 。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号