...
首页> 外文期刊>Experimental Thermal and Fluid Science: International Journal of Experimental Heat Transfer, Thermodynamics, and Fluid Mechanics >Experimental investigation of atomization and droplet turbulence characteristics of a twin-fluid nozzle with different self-excited vibrating cavity structures
【24h】

Experimental investigation of atomization and droplet turbulence characteristics of a twin-fluid nozzle with different self-excited vibrating cavity structures

机译:不同自激振动腔结构的双流体喷嘴雾化和液滴湍流特性的实验研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The spray atomization properties and droplet turbulence characteristics of a twin-fluid nozzle with and without a self-excited vibrating cavity are investigated and compared using a phase Doppler particle analyzer (PDPA). In the presence of a self-excited vibrating cavity, the spray cone angle and the droplet number concentration increase by nearly 50% and 55%, respectively, and the droplet Sauter mean diameter (SMD) and the mean axial velocity decrease by approximately 40% and 33.8%, respectively. However, the root mean squared (RMS) velocity fluctuation and the droplet turbulence simultaneously worsen. By combining the comparative analysis of the dimensionless parameters of the Reynolds number, Weber number and Ohnesorge number, the results indicate the significant role of the self-excited vibrating cavity in promoting twin-fluid atomization. Quantitative measurements using PDPA with the twin-fluid nozzle in the absence and presence of a self-excited vibrating cavity reveal the effects of the gas to liquid mass flow rate ratio (GLR) on the spray cone angle and the axial distribution of droplet SMD, mean axial velocity and number concentration. The fixed gas flow rate of 0.0003 kg.s(-1) and the liquid flow rate of 0.0077 kg.s(-1) are selected as representative, and the influence of the structural parameters of a self-excited vibrating cavity on the droplet turbulence characteristics are further investigated. The mean axial velocity along the radial direction first increases as a result of extrusion and diffusion and then decreases, possibly due to the drag effect caused by the surrounding air and droplets; it decreases along the axial direction due to the air resistance. The droplet mean velocity increases with an increase in orifice diameter or orifice depth, and a superior velocity characteristic is obtained when the orifice diameter is 2.5 mm or when the orifice depth is 2.5 mm. Meanwhile, the droplet mean velocity first increases and then decreases with the inc
机译:使用相位多普勒颗粒分析仪(PDPA)研究了具有和不具有自激振动腔的双流体喷嘴的喷雾雾化性能和液滴湍流特性。在存在自激的振动腔中,喷雾锥角和液滴数分别增加了近50%和55%,并且液滴制冷器平均直径(SMD)和平均轴向速度降低约40%分别为33.8%。然而,根部平均平方(RMS)速度波动和液滴湍流同时恶化。通过组合对雷诺数,韦伯号和OHNESORGE号码的无量纲参数的比较分析,结果表明了自激振动腔在促进双流体雾化方面的显着作用。在不存在和存在的情况下使用PDPA与双流体喷嘴的定量测量和自激振动腔的存在揭示了气体对液体质量流量比(GLR)对喷雾锥角的影响和液滴SMD的轴向分布,平均轴向速度和数量浓度。 0.0003kg的固定气体流速和0.0077kg.s(-1)的液体流速被选为代表性,以及在液滴上自激振动腔的结构参数的影响进一步研究了湍流特性。由于挤出和扩散的结果,沿径向的平均轴向速度首先增加,然后减少,可能是由于周围空气和液滴引起的阻力效应;由于空气阻力,它沿轴向减小。液滴平均速度随着孔口直径或孔深度的增加而增加,并且当孔口直径为2.5mm或孔深度为2.5mm时,获得优异的速度特性。同时,液滴平均速度首先增加,然后随着INC减少

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号