Minimally invasive left ventricular assist device implantation: optimizing device design for this approach

摘要

Introduction: The global heart failure (HF) burden is expected to increase due to aging populations, increasing number of end-stage HF patients and adverse lifestyle changes. Mechanical circulatory support (MCS) devices such as left ventricular assist devices (LVADs) have become a promising treatment option for short-term and long-term circulatory support of end-stage HF patients. Areas covered: Recent developments in MCS technology have been focused on miniaturization leading to the development of minimally invasive surgical procedures for LVAD implantation. This helps overcome possible postoperative complications such as major incisions and poor outcomes due to infections, right heart failure, and bleeding. This article discusses clinical and technological developments in the field of minimally invasive procedures for LVAD implantation. Expert opinion: Most patients might benefit from minimally invasive LVAD implantation performed through a limited left lateral thoracotomy associated with an upper hemisternotomy or a right anterior thoracotomy. The thoracotomy approach can also be considered in case of pump exchange or pump explant. The success of these techniques is mainly based on the optimization of LVAD pump design, inflow cannula insertion, and outflow graft as well as driveline exit sites. The future direction of the LVAD field is likely to include less-invasive approaches and smartificial technologies.