Microstructural control of green bodies prepared from Si-based multi-component non-aqueous slurries and their effects on fabrication of Si 3N 4 ceramics through post-reaction sintering

摘要

A Si-based slurry containing Si particles covered with Y2O3and MgO nanoparticles (NPs) has been successfully prepared and then applied to shape Si-based green compacts for the fabrication of silicon nitride (Si3N4) ceramics via post-reaction sintering. It was found that Y2O3and MgO NPs modified with polyethyleneimine-oleic acid complex (PEI-OA) could be effectively attached to Si particles by simple mixing in dense toluene slurry. Field emission scanning electron microscopy observations confirmed the attachment of PEI-OA-modified sintering aids to Si particles without forming large NP agglomerates. The adsorption of the PEI-OA-modified sintering aids and PEI-OA on the surface of Si particles drastically improved the stability of the Si-based toluene slurry, which was subsequently molded through wet vacuum casting and dewaxed to fabricate a Si-based green body. The obtained green body was nitrided at 1375?°C for 4?h at a N2pressure of 0.15?MPa and further sintered at 1850?°C for 2?h at a N2pressure of 0.9?MPa. The adsorption of sintering aid particles on the Si surface reduced the number of contact points between Si particles in the green body, which effectively suppressed the Si melting process during nitriding and improved the characteristics of the produced nitride body such as the degree of nitriding and α/(α+β) ratio of Si3N4, leading to the successful fabrication of high-density Si3N4ceramics during the subsequent densification step.