首页> 外文期刊>Cryogenics >'Electromaglev' ('active-maglev') - magnetic levitation of a superconducting disk with a DC field generated by electromagnets: Part 3. Theoretical results on levitation height and stability
【24h】

'Electromaglev' ('active-maglev') - magnetic levitation of a superconducting disk with a DC field generated by electromagnets: Part 3. Theoretical results on levitation height and stability

机译:“电磁磁悬浮”(“有源磁悬浮”)-具有电磁体产生的DC场的超导磁盘的磁悬浮:第3部分。悬浮高度和稳定性的理论结果

获取原文
获取原文并翻译 | 示例
           

摘要

We present Part 3 results of a comprehensive theoretical study of an 'electromaglev' ('active-maglev') system, in which a high-temperature superconducting bulk YBCO sample is levitated stably in a DC magnetic field generated by a magnet system. Field solutions have been obtained numerically to compute levitation height and define stability criteria for the superconducting disk sample. Our analysis assumes that the disk, which otherwise obeys the Bean critical-state model, traps flux when cooled in the presence of a field from the normal state to the superconducting state. Indeed it is shown that the trapped flux makes subtle and crucial changes in field distribution (and thus current density distribution) in the disk, which differ from those in a disk strictly obeying the Bean model used in the zeroth-order theory. The analysis confirms a key experimental finding that the trapped flux is another essential element for determining levitation height and ensuring tilt-free stable levitation. For stability, trapped flux in addition to at least two degrees of freedom for spatial supercurrent flow and the profile conditions imposed on the field generated by the magnet system. Procedures to produce stable, tilt-free levitation are described. Agreement between experiment and analysis on dependence of levitation height on magnet current is quite good. The analysis also shows that to achieve stable levitation, a YBCO ring sample requires a radial build that is sufficiently thick to permit the supercurrent to flow in the radial direction. The minimum radial build required, Delta R-min, for a YBCO ring of outside radius 12.5 mm operating at 77 K is typically similar to 50 mu m. An analytical expression that gives approximate values of Delta R-min has also been derived; Delta R-min depends inversely on the square of the critical current density of the superconductor. (C) 1998 Elsevier Science Ltd. Ail rights reserved. [References: 10]
机译:我们介绍了“磁悬浮”(“有源磁悬浮”)系统的全面理论研究的第3部分结果,在该系统中,高温超导块状YBCO样品在磁体系统产生的DC磁场中稳定悬浮。已经获得了数值求解现场的解决方案,以计算悬浮高度并为超导盘样品定义稳定性标准。我们的分析假设该磁盘(否则将遵循Bean临界状态模型)在存在从正常状态到超导状态的磁场时冷却时会捕获通量。实际上,已经表明,捕获的通量在磁盘中的场分布(以及电流密度分布)中产生了细微而关键的变化,这与严格遵循零阶理论中使用的Bean模型的磁盘中的变化不同。该分析证实了一项重要的实验发现,即所捕获的通量是确定悬浮高度并确保无倾斜的稳定悬浮的另一个基本要素。为了稳定起见,除了空间超电流的至少两个自由度以及施加在磁体系统产生的磁场上的轮廓条件外,还捕获了磁通。描述了产生稳定的,无倾斜的悬浮的程序。实验与分析之间关于磁悬浮高度对磁体电流的依赖性很好。分析还表明,要实现稳定的悬浮,YBCO环形样品需要足够厚的径向构造,以允许超电流沿径向流动。在77 K下工作的外径12.5 mm的YBCO环所需的最小径向构造Delta R-min通常类似于50μm。还推导了给出Delta R-min近似值的解析表达式。 ΔR-min反过来取决于超导体的临界电流密度的平方。 (C)1998 Elsevier Science Ltd.版权所有。 [参考:10]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号