...
首页> 外文期刊>Cellulose >Development of two-step pretreatment of Chinese fir sawdust using dilute sulfuric acid followed by sodium chlorite for bioethanol production
【24h】

Development of two-step pretreatment of Chinese fir sawdust using dilute sulfuric acid followed by sodium chlorite for bioethanol production

机译:使用稀硫酸的两步预处理中国杉木锯末的两步预处理,然后用氯酸钠进行生物乙醇生产

获取原文
获取原文并翻译 | 示例
           

摘要

Chinese fir sawdust (CFS) is an abundant potential feedstock for bio-ethanol production. However, as a sawdust from this softwood, its high recalcitrance to enzymatic hydrolysis limits its successful application. Herein, a novel two-step pretreatment with dilute sulfuric acid pretreatment followed by sodium chlorite delignification was developed to enhance enzymatic digestibility of CFS. After dilute sulfuric acid pretreatment removed a larger amount of hemicellulose, a simple sodium chlorite treatment demonstrated a remarkable delignification. Under this optimal condition, this pretreatment can yield cellulose-rich (76.8%) pretreated solids and make it possible to achieve high enzymatic hydrolysis yielding cellulose close to 100% by 48 h. Moreover, a high glucose titer of 138.8 g/L and an ethanol titer of 64.6 g/L were obtained by batch-fed enzymatic hydrolysis and subsequent fermentation, which are the highest so far reported for softwood biomass. These results suggest that this pretreatment can significantly improve the enzymatic hydrolysis and bioethanol production of CFS by removing hemicellulose and lignin.
机译:中国杉木锯末(CFS)是生物乙醇生产的丰富潜在原料。然而,作为来自这种软木的锯末,它的酶促水解的高批量限制了其成功的应用。在此,开发了一种具有稀硫酸预处理的新型两步预处理,然后被氯酸钠脱氨酸进行,以提高CFS的酶消化率。稀硫酸预处理除去较少量的半纤维素后,简单的亚氯酸钠治疗表现出显着的脱果。在这种最佳条件下,该预处理可以产生富含纤维素的(76.8%)预处理固体,并使得可以实现高酶水解,得到纤维素接近100%的纤维素48小时。此外,通过分批酶水解和随后的发酵获得了138.8g / L的高葡萄糖滴度和64.6g / L的乙醇滴度,这是对软木生物质的最高报道的最高的发酵。这些结果表明,通过去除半纤维素和木质素,这种预处理可以显着改善CFS的酶水解和生物乙醇生产。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号