...
首页> 外文期刊>Journal of Nuclear Materials: Materials Aspects of Fission and Fusion >Effect of chemical composition on irradiation creep of stainless steels irradiated in the BOR-60 reactor at 420 degrees C
【24h】

Effect of chemical composition on irradiation creep of stainless steels irradiated in the BOR-60 reactor at 420 degrees C

机译:化学成分对BOR-60反应器在420℃辐照的不锈钢的辐照蠕变的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The irradiation creep of six steels was investigated. For these steels, the Cr-Ni equivalents were calculated and the dependences of creep moduli on Ni equivalent were plotted. Pressurized tubes made from these steels were irradiated in different cells in row 6 of the BOR-60 reactor. The maximum damage doses achieved were about 60 and 100 dpa at irradiation temperature of 420 degreesC in various experiments. The levels of specified stresses changed from 0 to 320 MPa. The specimens were periodically removed from the reactor during refueling to measure their strain and then were returned to the reactor. The creep modulus B decreases with an increase of Ni equivalent over 16%. The dependence of creep modulus on Ni equivalent is similar to the dependence swelling on Ni. (C) 2002 Elsevier Science B.V. All rights reserved. [References: 13]
机译:研究了六种钢的辐照蠕变。对于这些钢,计算了Cr-Ni当量,并绘制了蠕变模量对Ni当量的依赖性。由这些钢制成的加压管在BOR-60反应器第6行的不同单元中进行辐照。在各种实验中,在420℃的照射温度下,获得的最大损伤剂量分别约为60和100 dpa。指定的应力水平从0变为320 MPa。在加油期间,定期从反应堆中取出样品以测量其应变,然后将其返回到反应堆中。蠕变模量B随着Ni当量的增加超过16%而降低。蠕变模量对镍当量的依赖性类似于对镍的溶胀依赖性。 (C)2002 Elsevier Science B.V.保留所有权利。 [参考:13]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号