首页> 外文期刊>Journal of chromatography, A: Including electrophoresis and other separation methods >Evaluation of columns packed with shell particles with compounds of pharmaceutical interest
【24h】

Evaluation of columns packed with shell particles with compounds of pharmaceutical interest

机译:评估带有药物感兴趣化合物的填充有壳颗粒的色谱柱

获取原文
获取原文并翻译 | 示例
           

摘要

The commercial C18 columns packed with sub-3μm shell particles were tested and compared to a reference UHPLC column, in terms of kinetic performance as well as selectivity, retention capability, peak shape and loading capacity. For this purpose, a set of pharmaceutically relevant molecules was selected, including acidic, neutral and basic drugs. Regarding kinetic performance, h _(opt) values for the shell particles were found between 1.7 and 2, while the UHPLC column provided a value of approximately 2.5. However, this impressive performance should be considered with caution, particularly for the construction of kinetic plots since h opt values were sometimes related to the column dimensions, depending on the provider (h _(opt) comprised between 1.8 and 2.6 for longer columns of 150mm packed with shell particles). Despite the non-porous inner core of the shell particles representing between 25 and 36% of the particle, we demonstrated that the decrease in retention was on the maximum equal to 15% for Ascentis column while Acquity and Poroshell were strictly equivalent in terms of retention. Concerning loading capacity, it remains comparable to that of fully porous sub-2μm particles and always more pronounced with 0.1% formic acid vs. phosphate buffer. The loading capacity of the different columns was found to be better correlated to the pore volume or surface coverage than the shell thickness. Experimentally, the most pronounced overloading was observed with the Poroshell. Finally, the selectivity and peak shape were evaluated using a mixture of basic and acidic drugs. It appears that results were very similar between sub-3μm shell particles and fully porous sub-2-μm particles for our mixture of compounds, showing the ability to transfer existing methods to shell particles, with only limited adjustments. This study confirms the potential of columns packed with shell particles and demonstrates the interest of such column technology with pharmaceutical compounds.
机译:测试了填充有亚3μm壳颗粒的商业C18色谱柱,并在动力学性能以及选择性,保留能力,峰形和负载能力方面与参考UHPLC色谱柱进行了比较。为此,选择了一组药物相关分子,包括酸性,中性和碱性药物。关于动力学性能,壳颗粒的h_(opt)值介于1.7和2之间,而UHPLC色谱柱的h _(opt)值约为2.5。但是,应谨慎考虑这种令人印象深刻的性能,尤其是在构造动力学图时,因为h opt值有时与色谱柱尺寸有关,具体取决于提供者(对于150mm较长的色谱柱,h _(opt)介于1.8和2.6之间装满贝壳颗粒)。尽管壳颗粒的无孔内核占颗粒的25%到36%,但我们证明了Ascentis色谱柱的保留降低最大等于15%,而Acquity和Poroshell的保留严格相同。关于负载能力,它仍然与完全多孔的亚2μm颗粒相当,并且相对于磷酸盐缓冲液,0.1%的甲酸总是更明显。发现不同柱的装载能力与孔体积或表面覆盖率比壳厚度更好。在实验中,使用Poroshell可以观察到最明显的过载。最后,使用碱性药物和酸性药物的混合物评估了选择性和峰形。对于我们的混合物,看来亚3μm壳颗粒和全多孔亚2μm颗粒之间的结果非常相似,显示了只需有限的调整即可将现有方法转移至壳颗粒的能力。这项研究证实了填充壳颗粒的色谱柱的潜力,并证明了这种将色谱柱技术用于药物化合物的兴趣。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号