首页> 外文期刊>Journal of Wuhan University of Technology. Materials Science edition >Preparation of Organic Montmorillonite and Mechanical Properties of Montmorillonite/Unsaturated Polyester Composites
【24h】

Preparation of Organic Montmorillonite and Mechanical Properties of Montmorillonite/Unsaturated Polyester Composites

机译:有机蒙脱土的制备及蒙脱土/不饱和聚酯复合材料的力学性能

获取原文
获取原文并翻译 | 示例
           

摘要

The synthesis process of organic montmorillonite was designed and some kinds of montmorillonite/ unsaturated polyester composites using different interlayer spacing montmorillonite were prepared, The interlayer spacing of montmorillonite was investigated by XRD and was increased to 3 .98 nm . The relationship between the four influential factors and the interlayer spacing were regressively analyzed and the mathematical model was established, and the result shows when the content of organic reagent was less than 70 percent, the relationship between the interlayer spacing and the content was linear as follows: interlayer spacing = 1.771 + 2.828 X concentration, the effect of the other factors was not significant. Additionally, the testing of mechanical properties of the composites showed the impact strength was improved by 217 percent , and the bending strength was improved by 355 percent , when using the montmorillonite (MMT) of the largest interlayer spacing (3.98 nm) . The result of ESEM shows the interface is bonded, well when the composite specimen contains the 3.98 nm MMT.
机译:设计了有机蒙脱土的合成工艺,制备了不同层间间距的蒙脱土/不饱和聚酯复合材料,X射线衍射研究了蒙脱土的层间间距并增大到3 .98 nm。回归分析了四种影响因素与夹层间距的关系,建立了数学模型,结果表明,当有机试剂含量小于70%时,夹层间距与含量的关系呈线性关系。 :层间距= 1.771 + 2.828X浓度,其他因素的影响不显着。另外,复合材料的机械性能测试表明,当使用最大层间间距(3.98 nm)的蒙脱石(MMT)时,冲击强度提高了217%,弯曲强度提高了355%。 ESEM的结果表明,当复合样品中包含3.98 nm MMT时,界面是牢固结合的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号