...
首页> 外文期刊>Journal of Tribology >Influence of contact pressure on central and minimum film thickness within ultrathin film lubricated contacts
【24h】

Influence of contact pressure on central and minimum film thickness within ultrathin film lubricated contacts

机译:接触压力对超薄膜润滑触点内中心和最小薄膜厚度的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Recent numerical results have indicated that the relationship between the film thickness and the speed may not always follow the simple power law, especially under severe conditions. This paper is aimed at obtaining experimental results at high contact stresses and low speeds to study the thin film behavior. Ultrathin lubricant films were observed at maximum Hertz pressures of 0.52, 1.01, and 1.54 GPa by using an optical test rig. Central and minimum film thickness values were obtained with thin film colorimetric interferometry from chromatic interferograms. The nonlinear behavior of both central and minimum film thicknesses in log-log coordinates was observed as rolling speed and thereby film thickness decreased. This tendency became more obvious at higher contact pressures.
机译:最近的数值结果表明,膜厚度和速度之间的关系可能并不总是遵循简单的幂定律,特别是在恶劣条件下。本文旨在获得在高接触应力和低速下的实验结果,以研究薄膜的行为。使用光学测试仪在0.52、1.01和1.54 GPa的最大赫兹压力下观察到超薄润滑剂膜。使用薄膜色度干涉法从彩色干涉图获得中心和最小膜厚度值。随着轧制速度观察到中心和最小膜厚度在对数-对数坐标中的非线性行为,从而膜厚度减小。在较高的接触压力下,这种趋势变得更加明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号