首页> 外文期刊>Desalination: The International Journal on the Science and Technology of Desalting and Water Purification >Effect of system parameters and of inorganic salts on the decolorization and degradation of Procion H-exl dyes.Comparison of H2O2/UV,Fenton,UV/Fenton,TiO2/UV and TiO2/UV/H2O2 processes
【24h】

Effect of system parameters and of inorganic salts on the decolorization and degradation of Procion H-exl dyes.Comparison of H2O2/UV,Fenton,UV/Fenton,TiO2/UV and TiO2/UV/H2O2 processes

机译:系统参数和无机盐对Procion H-exl染料的脱色和降解的影响。H2O2/ UV,Fenton,UV / Fenton,TiO2 / UV和TiO2 / UV / H2O2工艺的比较

获取原文
获取原文并翻译 | 示例
           

摘要

Reactive dyes are extensively used in the last years due to their superior performance,but they are environmentally hazardous.In the present work,the decolorization and degradation of commercial reactive azo dyes(Procion Navy H-exl,Procion Crimson H-exl and Procion Yellow H-exl)were studied using five advanced oxidation processes(AOPs):H2O2/UV,Fenton,UV/Fenton,TiO/UV and TiO2/UV/H2O2 The dependence of the decolorization on the system parameters(solution pH,dye and reactants initial concentrations,and TiO2 loading)and on the presence of salts(NaCl,Na2CO3,NaHCO3,Na2SO4,NaNO3 and Na3PO4)was investigated.The decolorization(determined by spectrophotometric analysis)and the degradation(determined as TOC reduction)were compared for the different processes examined.The decolorization of the Procion H-exl solutions considered was found to strongly depend on the system parameters in all five AOPs.Although decolorization is very fast for the Fenton process and becomes even faster for the UV/Fenton process,degradation rates are relatively low for these two methods.Addition of H2O2 increases the decolorization and especially the degradation rates for the TiO2/UV process.The H2O2/UV and TiO2/UV/H2O2 processes result in the fastest dye dgradation.The addition of teh salts examined has in general an adverse effect on the decolorization rates,but to a varying degree depending on the salt used.
机译:活性染料由于其优越的性能而在近几年中被广泛使用,但是它们对环境有害。使用五个高级氧化工艺(HOP)研究了H-exl:H2O2 / UV,Fenton,UV / Fenton,TiO / UV和TiO2 / UV / H2O2脱色对系统参数(溶液pH,染料和反应物)的依赖性研究了初始浓度,TiO2含量和盐(NaCl,Na2CO3,NaHCO3,Na2SO4,NaNO3和Na3PO4)的存在。研究发现,所考虑的Procion H-exl溶液的脱色在很大程度上取决于所有五个AOP中的系统参数,尽管Fenton工艺的脱色非常快,而UV / Fento的脱色甚至更快在工艺中,这两种方法的降解率相对较低。添加H2O2会增加脱色,尤其是TiO2 / UV工艺的降解率.H2O2 / UV和TiO2 / UV / H2O2工艺导致最快的染料降解。所检查的盐的添加通常对脱色率有不利影响,但是根据所用盐的不同而不同。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号