首页> 外文期刊>Water Science and Technology >Influence of solid retention time on the rheology of MBR sludge
【24h】

Influence of solid retention time on the rheology of MBR sludge

机译:固体停留时间对MBR污泥流变性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The rheological characterization is of crucial importance in sludge management both for biomass dewatering and stabilization purposes and for the definition of design parameters for sludge handling operations. The sludge retention time (SRT) has a significant influence on biomass properties in biological wastewater treatment systems and in particular in membrane bioreactors (MBR). The aim of this work is to compare the rheological behaviour of the biomass in a membrane bioreactor operated under different SRT. A bench scale MBR was operated for four years under the same conditions except for the SRT, that ranged from 20 days to complete sludge retention. The rheological properties were measured over time and the apparent viscosity was correlated with the concentration of solid material under equilibrium conditions. The three models most commonly adopted for rheological simulations were evaluated and compared in terms of their parameters. Steady state average values of these parameters were related to the equilibrium biomass concentration (MLSS). The models were tested to select the one better fitting the experimental data in terms of Mean Root Square Error (MRSE). The relationship between the apparent viscosity and the shear rate, as a function of solid concentration, was determined and proposed.
机译:流变特性在污泥管理中对于生物质脱水和稳定化目的以及污泥处理操作的设计参数的定义至关重要。污泥保留时间(SRT)对生物废水处理系统中,尤其是膜生物反应器(MBR)中的生物质特性有重要影响。这项工作的目的是比较在不同的SRT下运行的膜生物反应器中生物质的流变行为。台式MBR在相同条件下运行了四年,但SRT除外(从20天到完全保留污泥)。随时间测量流变性质,并且表观粘度与平衡条件下固体物质的浓度相关。对流变模拟最常用的三个模型进行了评估,并根据其参数进行了比较。这些参数的稳态平均值与平衡生物量浓度(MLSS)相关。对模型进行了测试,以根据均方根误差(MRSE)选择一种更适合实验数据的模型。确定并提出了表观粘度和剪切速率之间的关系,作为固体浓度的函数。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号