首页> 外文期刊>Proceedings of the Institution of Mechanical Engineers >Investigation of aerodynamic heating in V-shaped cowl-lip of the inward turning inlet
【24h】

Investigation of aerodynamic heating in V-shaped cowl-lip of the inward turning inlet

机译:向内进气口V形前缘的空气动力加热研究

获取原文
获取原文并翻译 | 示例
           

摘要

Complex flow field structure, which is induced by the leading edge of V-shaped cowl-lip in hypersonic inward turning inlet, causes severe thermal load. The V-shaped cowl-lip is simplified as the V-shaped leading edge. Both wind tunnel tests and numerical simulations are applied to study the flow field structures. And numerical simulation is used to investigate the heat flux. The result shows that the V-shaped leading edge, compared with blunt body and slender body, presents complex shock wave interaction and suffers from critical aerodynamic heating. The shape parameter of the V-shaped leading edge, angle theta of the leading edge, is not a sensitive parameter of the heat flux. It does not effectively reduce the maximum of the heat flux. Another shape parameter, ratio (R/r) of rounded radius and blunted radius, has obvious effect on the peak value of the heat flux. The heat flux does not decrease necessarily with increasing R/r when R/r6.
机译:高超声速向内旋转进气口中的V形前缘的前缘引起的复杂流场结构会导致严重的热负荷。 V形前围唇简化为V形前缘。风洞试验和数值模拟都用于研究流场结构。并利用数值模拟研究了热通量。结果表明,与钝形体和细长形体相比,V形前缘呈现出复杂的冲击波相互作用,并且受到严重的空气动力学加热的影响。 V形前缘的形状参数,即前缘的角度θ,不是热通量的敏感参数。它不能有效地减小热通量的最大值。另一个形状参数,即圆角半径和钝角半径之比(R / r),对热通量的峰值有明显的影响。当R / r6时,热通量不一定随R / r的增加而降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号