...
首页> 外文期刊>Journal of Polymers and the Environment >Biocomposite Fiber-Matrix Treatments that Enhance In-Service Performance Can Also Accelerate End-of-Life Fragmentation and Anaerobic Biodegradation to Methane
【24h】

Biocomposite Fiber-Matrix Treatments that Enhance In-Service Performance Can Also Accelerate End-of-Life Fragmentation and Anaerobic Biodegradation to Methane

机译:增强服役性能的生物复合纤维基体处理还可以加速寿命终止裂解和厌氧生物降解为甲烷

获取原文
获取原文并翻译 | 示例
           

摘要

Biodegradable resins can enhance the environmental sustainability of wood-plastic composites (WPCs) by enabling methane (CH) recovery via anaerobic digestion (AD). An under appreciated step in biocomposite AD is the role of cracking and fragmentation due to moisture uptake by the wood fiber (WF) fraction. Here, we use batch microcosms to simulate AD at end-of-life and to assess the effects of fiber-matrix treatments used to retard in-service moisture uptake. The composites evaluated were injection molded poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) with WF (0, 20%) using two fiber-matrix compatibilization treatments: (1) hydrophobic silane treatment of the wood fiber and (2) grafting of hydrophilic maleic anhydride groups to the PHBV matrix. Both treatments accelerated rates of mass loss and CH production by a factor of 1.2-2.3 compared to neat PHBV. The fragmentation rate, as measured by mass loss, increased significantly for treated samples compared to untreated samples. A ranking of test samples from lowest to highest rates of mass loss gave the following sequence: neat PHBV maleated PHBV PHBV plus untreated WF maleated PHBV plus untreated WF PHBV plus silane-treated WF. Compared to the untreated samples, maleic anhydride treatment increased the mass loss rate by 30%, and silane treatment increased the mass loss rate by 92%. Onset of cracking in silane-treated composites was observed at 2 weeks (using X-ray micro-computed tomography). At the same time, solid mass loss and CH production peaked, implicating cracking and physical disintegration as the rate-limiting step for accelerated anaerobic degradation. When modified to account for bioplastic matrix degradation, a previously derived moisture-induced damage model could predict the onset of composite fragmentation at end-of-life. These results are significant for design of bio-WPCs and demonstrate that treatments designed to improve in-service performance can also improve end-of-life options.
机译:可生物降解树脂可通过厌氧消化(AD)回收甲烷(CH),从而提高木塑复合材料(WPC)的环境可持续性。生物复合材料AD中未得到充分理解的步骤是由于木纤维(WF)组分吸收水分而导致的裂解和破碎作用。在这里,我们使用批处理微观世界来模拟寿命终止时的AD,并评估用于延迟使用中水分吸收的纤维基质处理的效果。使用两种纤维-基体相容性处理方法,将所评估的复合材料与WF(0,20%)一起注塑成型为WF(0,20%)的聚(羟基丁酸酯-共-羟基戊酸酯)(PHBV):(1)木纤维的疏水硅烷处理和(2)亲水性接枝PHBV基质中的马来酸酐基团。与纯净PHBV相比,这两种处理均将质量损失和CH产生的速度提高了1.2-2.3倍。与未处理的样品相比,处理后的样品的碎裂率(通过质量损失测定)显着增加。从最低质量损失率到最高质量损失率对测试样品进行排序,得出以下顺序:纯PHBV马来酸化PHBV

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号