首页> 外文期刊>International journal of hydrogen energy >Cold-rolled magnesium hydride strips decorated with cold-sprayed Ni powders for solid-state - hydrogen storage
【24h】

Cold-rolled magnesium hydride strips decorated with cold-sprayed Ni powders for solid-state - hydrogen storage

机译:用冷喷涂的镍粉装饰的冷轧氢化镁带,用于固态-储氢

获取原文
获取原文并翻译 | 示例
           

摘要

The present work reports for the first time application of cold spray coating for doping plastically deformed Mg-strips by different concentrations of fine Ni powders. For present study, Mg rods were cold-rolled for 300 passes and then coated by Ni fine powders, using a cold spray process operated at 150 degrees C under high argon gas pressure. The Ni powders were pelted into Mg-substrate through the high-velocity jet at a speed of 500 m/s. Under these preparation conditions, Ni powders were plastically deformed at the surface of Mg strips to create numerous pores and cavities, worked as hydrogen diffusion gateway. The as-coated Mg sheets with 3-Ni layers (5.28 wt%) possessed good hydrogenation/dehydrogenation kinetics, implied by a short absorption/desorption time (5.1/11 min) of 6.1 wt% hydrogen at 150 degrees C/10 bar and 200 degrees C/200 mbar, respectively. The fabricated solid-state hydrogen storage nanocomposite strips revealed good cyclability of achieving 600 cycles at 200 degrees C without failure of degradation. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
机译:本工作首次报道了冷喷涂涂层通过不同浓度的细粉镍掺杂可塑性变形的Mg带的应用。对于本研究,将镁棒冷轧300道次,然后在150摄氏度下在高氩气压力下使用冷喷涂工艺将其涂以镍细粉。通过高速射流以500 m / s的速度将Ni粉磨碎到Mg基材中。在这些制备条件下,Ni粉在Mg条的表面塑性变形,形成大量的孔和腔,作为氢的扩散通道。带有3-Ni层(5.28 wt%)的Mg片材具有良好的加氢/脱氢动力学,这意味着在150°C / 10 bar的条件下6.1 wt%的氢气吸收/解吸时间短(5.1 / 11分钟),这意味着分别为200摄氏度/ 200毫巴。所制造的固态储氢纳米复合材料条显示出良好的循环能力,可在200摄氏度下实现600次循环而不会降解。 (C)2019氢能出版物有限公司。由Elsevier Ltd.出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号