首页> 外文期刊>IEEE Transactions on Vehicular Technology >Active Front Steering-Based Electronic Stability Control for Steer-by-Wire Vehicles via Terminal Sliding Mode and Extreme Learning Machine
【24h】

Active Front Steering-Based Electronic Stability Control for Steer-by-Wire Vehicles via Terminal Sliding Mode and Extreme Learning Machine

机译:通过终端滑动模式和极端学习机的转向绕线车辆的主动前转向基于转向的电子稳定性控制

获取原文
获取原文并翻译 | 示例
           

摘要

In this article, a novel active front steering (AFS) control strategy including the upper controller and the lower controller is proposed to improve the yaw stability and maneuverability for steer-by-wire (SbW) vehicles. The adaptive recursive integral terminal sliding mode (ARITSM) control is adopted in the upper controller for guaranteeing the convergence performance of both the actual sideslip angle and the yaw rate with strong robustness and fast convergence rate. Then, a fast nonsingular terminal sliding mode (FNTSM) control with extreme learning machine (ELM) estimator to estimate its equivalent control is designed in the lower controller to track the desired front wheel steering angle calculated from the upper controller for driving the sideslip angle and the yaw rate to converge ideal value. It is shown that the upper controller takes two controlled variables (vehicle sideslip angle and yaw rate) and only one control input (front steering angle) into consideration, which can obtain a better performance compared with the case of using only one of these values. Since using the ELM technique in the lower controller to estimate the equivalent control of the FNTSM, not only the dependence of SbW system dynamics can be alleviated in the process of designing controller but also the excellent steering control performance can be achieved. Comparative simulations are carried out by utilizing Carsim and Matlab software to validate the excellent performance of the proposed control strategy for different steering maneuvers.
机译:在本文中,提出了一种新颖的主动前转向(AFS)控制策略,包括上控制器和下控制器,以改善逐线(SBW)车辆的偏航稳定性和机动性。在上控制器中采用自适应递归积分终端滑动模式(ARITSM)控制,以确保实际侧滑角和横摆率的收敛性能,具有强大的鲁棒性和快速收敛速度。然后,利用极端学习机(ELM)估计器的快速非垂直终端滑动模式(FNTSM)控制以估计其等效控制,以较低控制器设计,以跟踪从上控制器计算的所需的前轮转向角,以驱动侧侧角度和横摆率收敛理想值。结果表明,上控制器采用两个受控变量(车辆侧滑角和横摆率),并且考虑仅一个控制输入(前转向角),其可以获得更好的性能与仅使用这些值中的一个的情况。由于使用较低控制器中的ELM技术来估计FNTSM的等效控制,因此不仅可以在设计控制器的过程中可以减轻SBW系统动态的依赖性,而且可以实现优异的转向控制性能。通过利用Carsim和Matlab软件来验证不同转向机动的拟议控制策略的优异性能,进行比较模拟。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号