Precise Estimation of Initial Pole Position for Surface Permanent Magnet Synchronous Motor Based on Modified Reference Frame Method

摘要

This paper presents an accurate initial pole position (IPP) estimation method for a surface mounted permanent magnet synchronous motor (PMSM) without the use of pole sensors. To estimate the IPP, the proposed method uses the concept of reference frame. In this method, three torque commands, separated by 45° electrically from each other, are applied to the PMSM. Using the reference torque commands, moving distances are measured and transformation matrix is applied to eliminate the load torque term. Finally, the IPP is determined using the secant method. The IPPs under no load and at specific loaded condition are measured. The result of the load condition is compared with the previously proposed two reference frame method. The proposed method gives better result under load condition, compared with the two reference frame method, which fails to give satisfactory result under load condition.