【24h】

InN p-i-n Nanowire Solar Cells on Si

机译:Si上的InN p-i-n纳米线太阳能电池

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, we report the first experimental demonstration of InN nanowire solar cells. By employing an in situ deposited In seeding layer, we have achieved electronically pure, nearly intrinsic InN nanowires directly on Si(1 1 1) substrates by molecular beam epitaxy. The growth and characterization of Si- and Mg-doped InN nanowires is also investigated, which can exhibit superior structural and optical properties. We have further studied the epitaxial growth, fabrication, and characterization of InN:Si/i-InN and InN:Mg/i-InN/InN:Si axial nanowire structures on p-type and n-type Si(1 1 1) substrates, respectively. With the use of a CdS surface passivation, InN:Mg/i-InN/InN:Si nanowire homojunction solar cells exhibit a promising short-circuit current density of ∼14.4 mA/cm$^2$ and power-conversion efficiency of ∼0.68% under simulated one-sun (AM 1.5G) illumination. This work suggests the first successful demonstration of p-type doping in InN nanowires and also constitutes important progress for the development of InGaN-based, full-solar-spectrum photovoltaics.
机译:在本文中,我们报告了InN纳米线太阳能电池的首次实验演示。通过采用原位沉积的In籽晶层,我们通过分子束外延直接在Si(1'1)衬底上实现了电子纯净,几乎本征的InN纳米线。还研究了掺杂Si和Mg的InN纳米线的生长和表征,这些纳米线可以表现出优异的结构和光学性能。我们进一步研究了在p型和n型Si(1'1')衬底上InN:Si / i-InN和InN:Mg / i-InN / InN:Si轴向纳米线结构的外延生长,制造和表征, 分别。通过使用CdS表面钝化,InN:Mg / i-InN / InN:Si纳米线同质结太阳能电池显示出有希望的短路电流密度约为14.4 mA / cm $ ^ 2 $,功率转换效率约为0.68 %在模拟一太阳(AM 1.5G)光照下。这项工作表明InN纳米线中p型掺杂的首次成功演示,并且也为基于InGaN的全光谱光伏技术的发展提供了重要的进展。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号