...
首页> 外文期刊>European Spine Journal >Placement of pedicle screws using three-dimensional fluoroscopy-based navigation in lumbar vertebrae with axial rotation
【24h】

Placement of pedicle screws using three-dimensional fluoroscopy-based navigation in lumbar vertebrae with axial rotation

机译:基于三维透视的椎弓根螺钉在带轴向旋转的腰椎中的定位

获取原文
获取原文并翻译 | 示例
           

摘要

Despite potential advantages of three-dimensional fluoroscopy-based navigation, there still remain a lot of controversies about the indications of this technology, especially whether it is worthy of being used in placement of pedicle screws in lumbar spine. However, according to the inconsistent conclusions reported in the literature and our experiences, the traditional method relying on anatomical landmarks and fluoroscopic views to guide lumbar pedicle screw insertion is unable to meet the requirement of precise screw placement. Based on our observation, screw malposition seems to occur concomitant with vertebral axial rotation which is a ubiquitous phenomenon. Three-dimensional fluoroscopy-based navigation can provide the most valuable axial images in real-time, so it may be useful for placement of pedicle screws in lumbar spine. This study was intended to evaluate the effect of axial rotation of lumbar vertebrae on the accuracy of pedicle screw placement using the traditional method, as well as assess the value of three-dimensional fluoroscopy-based navigation in improving the accuracy. Sixteen lumbar simulation models at different degrees of axial rotation (0°, 5°, 10°, and 20°), with every four assigned the same degree, were equally divided into two groups (traditional method group and three-dimensional fluoroscopy-based navigation group). Random placement of pedicle screws was carried out, followed by CT scan postoperatively. Then the outer pedicle cortex contours were depicted from reconstructed sectional pedicle images using Photoshop. The accuracy of pedicle screw placement was evaluated by determining the interrelationship between screw trajectory and pedicle cortex (quality), and measuring the shortest distance from pedicle screw axis to outer cortex of the pedicle (quantity). Eighty pedicle screws were implanted, respectively, in each group. In traditional method group, statistical difference existed in the accuracy of pedicle screw placement at different axial rotational degrees (P < 0.05). With degrees increasing, the accuracy declined. The accuracy of three-dimensional fluoroscopy-based navigation group was higher than traditional method group in vertebrae with axial rotation (P < 0.01). In qualitative evaluation, the accuracy of the two methods had statistical difference when the degree was 20°, and in quantitative evaluation, statistical difference existed in 5°, 10°, and 20° of vertebral axial rotation.
机译:尽管基于三维荧光透视的导航具有潜在的优势,但是关于这项技术的适应症仍然存在很多争议,尤其是它是否值得在腰椎椎弓根螺钉中使用。然而,根据文献报道的不一致结论和我们的经验,传统的依靠解剖学标志和透视检查指导腰椎椎弓根螺钉置入的方法不能满足精确置入螺钉的要求。根据我们的观察,螺钉错位似乎与椎骨轴向旋转同时发生,这是普遍存在的现象。基于三维透视的导航可以实时提供最有价值的轴向图像,因此对于在腰椎中放置椎弓根螺钉可能很有用。这项研究旨在评估使用传统方法的腰椎轴向旋转对椎弓根螺钉放置精度的影响,以及评估基于三维透视的导航对提高准确性的价值。将十六种不同轴向旋转度(0°,5°,10°和20°)的腰椎仿真模型(每四个都分配相同的程度)平均分为两组(传统方法组和基于三维透视的组)导航组)。进行椎弓根螺钉的随机放置,然后进行CT扫描。然后使用Photoshop从重建的椎弓根图像中描绘出椎弓根的外部皮质轮廓。通过确定螺钉轨迹与椎弓根皮层之间的相互关系(质量),并测量从椎弓根螺钉轴到椎弓根外皮层的最短距离(数量)来评估椎弓根螺钉放置的准确性。每组分别植入80个椎弓根螺钉。传统方法组在不同轴向旋转度下椎弓根螺钉置入的准确性存在统计学差异(P <0.05)。随着度数的增加,准确性下降。基于三维透视的导航组在椎骨轴向旋转方面的准确性高于传统方法组(P <0.01)。在定性评估中,当度数为20°时,这两种方法的准确性存在统计差异;在定量评估中,椎体轴向旋转的5°,10°和20°存在统计差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号