Low-precision DSP-based floating-point multiply-add fused for field programmable gate arrays

摘要

Floating-point (FP) multiply-add fused (F1*F2 ?? F3) and multiply-accumulate represent the most common arithmetic operation in a wide range of applications, such as graphic processing, multimedia or FP digital signal processing (DSP). This study proposes FP multiply-add fused units for low-precision formats (IEEE 16-bit half precision or the 32-bit single precision) which rely on modern Field Programmable Gate Array (FPGA) features such as the available integer multiplyaccumulate- based support built-in the FPGA DSP blocks. These are employed as building-blocks within the mantissa datapath processing for the multiplication and the add/subtract operations. In order to use the DSP block for these operations, the alignment right shifts are performed before the multiply-add stage: a right shift on the addend, and, a right shift for one of the multiplicands. This results in efficient DSP usage; thus both cost savings and higher performance (high working frequencies and low latencies) are obtained for the multiply-add fused operation.