首页> 外文期刊>Combustion and Flame >On the impact of fuel injection angle in Euler-Lagrange large eddy simulations of swirling spray flames exhibiting thermoacoustic instabilities
【24h】

On the impact of fuel injection angle in Euler-Lagrange large eddy simulations of swirling spray flames exhibiting thermoacoustic instabilities

机译:关于燃料喷射角度燃料喷射角度的影响,旋转喷雾火焰呈现热声型稳定性

获取原文
获取原文并翻译 | 示例
           

摘要

This study deals with the fundamental problem of combustion dynamics in gas turbine combustors operating with liquid fuel. In this framework the present work proposes the study of an academic liquid fueled combustor sensitive to thermoacoustic instabilities, simulated via high-fidelity Large Eddy Simulations. The experimental setup addressed is SICCA-spray from EM2C laboratory featuring both stable and unstable flames depending on the combustion chamber length. The proposed analysis, based on the Euler-Lagrange modeling approach, studies the impact of the spray injection angle theta on both the stable flame and the triggering of the longitudinal combustor acoustic mode when using a longer quartz tube. For the liquid injection modeling, the FIM-UR semi-empirical model is adopted with three different theta values: theta = 35 degrees, 45 degrees and 60 degrees. In stable conditions, the spray angle is proven to have a negligible impact on the flame anchoring point, however, the mean flame length and fuel distribution are found to be slightly modified by the velocity at which droplets enter the combustion chamber. For the thermoacoustically unstable conditions, two well-established stable limit cycles with the same frequency and similar amplitudes are obtained when fuel is injected at theta = 45 degrees and 60 degrees. Contrarily, the system stabilizes when theta = 35 degrees pointing to the importance of the dynamics of the liquid film layer formed inside the injector for this setup. Likewise, this liquid film layer dynamics and its modeling appear critical as already suggested by previous studies on the same configuration. The detailed analysis of the thermoacoustically unstable different predictions is then performed through the investigation of the spatial fields of the local Rayleigh index obtained following the novel extension in the frequency domain of the Rayleigh criterion complemented by the application of Dynamic Mode Decomposition. It confirms that the injection angle of the liquid spray has a significant effect on the thermoacoustic response of the system. Indeed the influence of theta on thedynamics of the liquid fuel when entering the combustion chamber is proven to have an impact on the synchronization mechanism governing the liquid phase with respect to acoustics sustaining the observed limit cycles. More specifically, couplings at the liquid phase level are evidenced by introducing two novel indices correlating the fluctuations of liquid fuel volume fraction and evaporation rate with pressure. (C) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
机译:本研究涉及用液体燃料操作的燃气轮机燃烧器中燃烧动力学的根本问题。在本框架中,本工作提出了对热声型稳定性敏感的学术液体燃料燃烧器的研究,通过高保真大涡模拟模拟。寻址的实验装置是来自EM2C实验室的SICCA喷雾,其特征在于稳定和不稳定的火焰,这取决于燃烧室长度。所提出的分析,基于欧拉拉格朗日建模方法,研究喷射注射角θ在使用更长的石英管时对纵向燃烧器声学模式的稳定火焰和触发的影响。对于液体注射建模,使用三种不同的THEA值采用FIM-UR半实证模型:THETA = 35度,45度和60度。在稳定的条件下,被证明的喷射角度对火焰锚定点具有可忽略的影响,然而,发现平均火焰长度和燃料分布通过液滴进入燃烧室的速度略微修改。对于热声学不稳定的条件,当燃料在θ= 45度和60度注入60度时,获得具有相同频率和相似幅度的两个具有相同频率和相似幅度的两个良好的稳定极限循环。相反,当θ= 35度指向该设置内部的喷射器内部形成的液体膜层的动态的重要性时,系统稳定。同样地,这种液体膜层动态及其建模似乎至关重要,如前所述对相同配置的研究已经提出。然后,通过在通过应用动态模式分解的应用程序互补的瑞利标准的频率域中获得的新颖延伸之后获得的本地瑞利指数的空间场进行热声学上不稳定的不同预测的详细分析。它证实液体喷雾的注射角对系统的热声反应具有显着影响。实际上,证明了在进入燃烧室时,θ对液体燃料的表现的影响被证明是对控制液相的同步机制相对于受到观察到的极限循环的声学的同步机制的影响。更具体地,通过引入两个新颖的索引来证明液相水平的联轴器通过与压力相关的液体燃料体积分数和蒸发速率的蒸发速率相关。 (c)2021燃烧研究所。由elsevier Inc.保留所有权利发布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号