首页> 美国卫生研究院文献>other >Measuring In-Home Walking Speed using Wall-Mounted RF Transceiver Arrays
【2h】

Measuring In-Home Walking Speed using Wall-Mounted RF Transceiver Arrays

机译:使用壁挂式射频收发器阵列测量家庭步行速度

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this paper we present a new method for passively measuring walking speed using a small array of radio transceivers positioned on the walls of a hallway within a home. As a person walks between a radio transmitter and a receiver, the received signal strength (RSS) detected by the receiver changes in a repeatable pattern that may be used to estimate walking speed without the need for the person to wear any monitoring device. The transceivers are arranged as an array of 4 with a known distance between the array elements. Walking past the first pair of transceivers will cause a peak followed by a second peak when the person passes the second pair of transceivers. The time difference between these peaks is used to estimate walking speed directly. We further show that it is possible to estimate the walking speed by correlating the shape of the signal using a single pair of transceivers positioned across from each other in a hallway or doorframe. RMSE performance was less than 15 cm/s using a 2-element array, and less than 8 cm/s using a 4-element array relative to a gait mat used for ground truth.
机译:在本文中,我们提出了一种新方法,该方法使用位于房屋走廊墙壁上的一小部分无线电收发器来被动地测量步行速度。当人在无线电发射器和接收器之间行走时,由接收器检测到的接收信号强度(RSS)以可重复模式变化,该模式可用于估算行走速度,而无需该人佩戴任何监视设备。收发器以4个阵列的形式排列,阵列元素之间的距离已知。当人经过第二对收发器时,经过第一对收发器将导致一个峰值,然后是第二个峰值。这些峰值之间的时间差用于直接估算步行速度。我们进一步表明,有可能使用位于走廊或门框中彼此相对的一对收发器,通过关联信号的形状来估计步行速度。相对于用于地面真实情况的步态垫,使用2元件阵列的RMSE性能小于15 cm / s,使用4元件阵列的RMSE性能小于8 cm / s。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号