Development of a validated HPLC method for the separation and analysis of a Bromazepam Medazepam and Midazolam mixture

摘要

The purpose of this work was to develop a rapid, sensitive and validated HPLC method for the separation and analysis of a Bromazepam, Medazepam and Midazolam mixture. The three benzodiazepine compounds were separated on a reversed-phase C18 column at 50 °C using a mobile phase containing 25% acetonitrile, 45% methanol and 30% ammonium acetate (0.05 M). The pH was adjusted to pH=9 by the addition of ammonia solution (35%, w/w). The samples were detected using a UV detector at 240 nm. The validation study of the method included the effect of temperature, flow rate, ratio of the components of the mobile phase and the pH of the mobile phase on the efficiency of separation. The linear range of Bromazepam and Midazolam was between 0.12 and 0.18 mg/mL, while that of Medazepam was between 0.08 and 0.12 mg/mL. The relative standard deviation for precision was less than 2%. The linearity, selectivity, accuracy and robustness of the developed method showed acceptable values. The method was applied to the analysis of the samples of raw material of the three compounds under study, and the percentage of recoveries was 99.89%±1.06. It was also applied to the analysis of samples of pharmaceutical preparations of those compounds and spiked serum samples. Recoveries from serum samples ranged between 91.5% and 99.0%. The developed method is suitable for quality control of Bromazepam, Medazepam and Midazolam in their mixtures and in pharmaceutical preparations (tablets, capsules, ampoules). It can also be used to determine their concentrations in serum.