首页> 外文学位 >A New Graphene Quantum Dot Sensor for Estimating an Antibiotic Concentration
【24h】

A New Graphene Quantum Dot Sensor for Estimating an Antibiotic Concentration

机译:用于估计抗生素浓度的新型石墨烯量子点传感器

获取原文
获取原文并翻译 | 示例

摘要

The antibiotics have impacted the human ailments by curtailing the growth of microbes and by providing relief from microbial diseases. While there are a large number of analytical methods available for the determination of antibiotics concentration, they are time consuming and impractical for usage in the fields. This thesis is aimed at overcoming the deficiencies of those methods in developing a new sensor. It reports a study of graphene quantum dots (GQD) bound ferric ion for sensing an antibiotic, ciprofloxacin (CP). The interaction of ferric ion with CP was used as a probe for the analytical estimation of CP using differential pulse voltammetry (DPV). A solution containing ferric ion exhibits a well-defined cathodic peak at Epc=0.310 V vs saturated calomel electrode (SCE) with a peak width of 0.100V. When nanomolar to micromolar concentration of CP is present in the solution, along with ferric ion, three new peaks at EpcI=0.200V, Epc II=0.050 V and EpcIII=-0.085V are observed due to the binding of CP to ferric ion. The decrease in peak current of E pc at 0.310 V is proportional to the concentration of CP in the solution. The peak current at 0.200 V shows an increase corresponding to the CP concentration in solution. These results paved the way for examining the prospectus for developing a portable resistive sensor using interdigitated gold electrodes on alumina substrate. The principle of this sensor is based on that ferric ion bound to GQD will have a finite resistance and when it is bound to CP the resistance will increase as the charge transport faces a barrier due to bulky CP molecules. With a view to establish that ferric ion is binding to GQD, fluorescence of GQD has been recorded with ferric ion in solution. The approach adopted in developing resistive sensor is shown below. The numbers in the above picture denotes 1. Interdigitated gold electrodes 2. GQD bound interdigitated gold electrodes 3. Ferric ion bound to GQD 4. Attachment of CP to ferric ion. The sensor response is found to be dependent on the activity of the availability of ferric ion on GQD resulting in the usage of it as a disposable sensor. The interference of urea in the measurement of CP was examined for the practical usage of it in urine analysis.
机译:抗生素通过减少微生物的生长并减轻微生物疾病,已经影响了人类疾病。尽管有大量的分析方法可用于确定抗生素的浓度,但它们既费时又不实用。本文旨在克服这些方法在开发新传感器方面的不足。它报道了对石墨烯量子点(GQD)结合的铁离子用于感测抗生素环丙沙星(CP)的研究。铁离子与CP的相互作用用作探针,用于使用差分脉冲伏安法(DPV)进行CP的分析估计。相对于饱和甘汞电极(SCE),含铁离子的溶液在Epc = 0.310 V处显示明确定义的阴极峰,其峰宽为0.100V。当溶液中存在CP的摩尔浓度至微摩尔浓度以及三价铁离子时,由于CP与三价铁离子的结合,在EpcI = 0.200V,Epc II = 0.050 V和EpcIII = -0.085V处出现了三个新峰。在0.310 V时E pc的峰值电流的下降与溶液中CP的浓度成正比。 0.200 V的峰值电流显示出相应于溶液中CP浓度的增加。这些结果为检查使用氧化铝基板上的叉指式金电极开发便携式电阻式传感器的招股说明书铺平了道路。该传感器的原理是基于与GQD结合的铁离子具有有限的电阻,当与CP结合时,由于电荷传输面临着由于CP分子庞大而导致的势垒,电阻将增加。为了确定三价铁离子与GQD结合,已在溶液中用三价铁离子记录了GQD的荧光。开发电阻传感器的方法如下所示。上图中的数字表示1.交叉指形的金电极2. GQD结合的交叉指形的金电极3.与GQD结合的三价铁离子4. CP与三价铁的连接。发现传感器响应取决于GQD上铁离子可用性的活动,导致将其用作一次性传感器。检查尿素在CP测量中的干扰,以了解尿素在尿液分析中的实际用途。

著录项

  • 作者单位

    Rochester Institute of Technology.;

  • 授予单位 Rochester Institute of Technology.;
  • 学科 Materials science.;Science education.
  • 学位 M.S.
  • 年度 2018
  • 页码 115 p.
  • 总页数 115
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 公共建筑;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号