首页> 外文会议>International Workshop on Heat/Mass Transfer Advances for Energy Conservation and Pollution Control >Experimental investigation of freon mixture spreading over the structured Sulzer 500X packing at single drip point irrigation
【24h】

Experimental investigation of freon mixture spreading over the structured Sulzer 500X packing at single drip point irrigation

机译:单滴点灌溉结构苏尔寿500x包装氟伦混合筛选的试验研究

获取原文

摘要

The paper presents the results of experimental studies on liquid spreading over the Sulzer 500X packing at single drip point irrigation. The experiments were carried out using a 10% mixture of R114/R21 freons on one packing layer with a diameter of 0.6 m. The flow rate of liquid flowing from the lower edge of the packing was measured automatically by a flow meter moving along the packing sheets with a given step. The flow meter used volumetric measurement method. The receiving collector of flow meter is 50×50 mm in size, operating range of flow measurement is 0.05-50 ml/s. Distributions of liquid over the packing were measured at single-jet irrigation in the range of jet flow rates 2.5 < q_(irrig) < 60 ml/s. Spreading zone in the case of irrigation by a single jet is limited by the corrugation channels coming from the irrigation point. The pattern of spreading at low-flow jet irrigation has the shape of a dome with a low flow rate at the outlet of corrugation channels, which limit the spreading zone. With an increase in the flow rate, the share of liquid in these channels increases and dominates over other parts of the spreading zone.
机译:本文介绍了单滴点灌洗时苏尔寿500x填料液体涂抹实验研究的结果。使用直径为0.6μm的一个填充层,使用10%的R114 / R21 FREONS进行实验。通过沿着包装片的流量计自动测量从填料的下边缘流动的液体流动速率通过沿着包装板的流量计自动测量。流量计使用体积测量方法。流量计的接收收集器的尺寸为50×50毫米,流量测量的操作范围为0.05-50毫升/秒。在射流流速范围内的单喷射灌溉中测量填料上的液体上的分布。单个喷射灌溉的情况下的扩散区受到来自灌溉点的波纹通道的限制。在低流动射流灌溉处的铺展图案具有圆顶的形状,在波纹通道的出口处具有低流速,其限制了扩散区。随着流速的增加,这些通道中的液体的份额增加并且在扩散区的其他部件上占据了偏向。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号