首页> 外文会议>SPE Improved Oil Recovery Conference >Mechanistic Modeling of Carbonated Waterflooding
【24h】

Mechanistic Modeling of Carbonated Waterflooding

机译:碳酸碳酸碳酸机的力学造型

获取原文

摘要

CO2 enhanced oil recovery is usually affected by poor sweep efficiency due to unfavorable mobility contrast between the injected CO2 and oil. To alleviate this problem, CO2 is added to the injected brine and transported in the reservoir by flood water. Therefore, Carbonated Water Injection (CWI), takes advantage of both CO2 and water flooding processes. Furthermore, geochemical reactions between the injected carbonated brine and rock can alter petrophysical properties of the reservoir and affect final oil recovery. While there are several CWI coreflood experiments reported in the literature, simulation studies for this process are scarce. Accurate modeling of CWI performance requires a simulator with the ability to capture true physics of the CWI process. In this study, a compositional reservoir simulator developed at The University of Texas at Austin, UTCOMP, coupled with a state-of-the-art geochemical package developed by United States Geological Survey, IPhreeqc, is used to model CWI process. We considered the impact of CO2 mass transfer between brine and hydrocarbon phases based on thermodynamic constrains at the reservoir condition. In order to validate our simulation approach, the results of our CWI simulations were compared with a recently published coreflood experiment. Moreover, we investigated the fluid-rock interactions in CWI. The results of the simulations, indicated that prior to water breakthrough the main drive mechanism is displacement. But as more carbonated water is injected, CO2 diffuses more into the trapped oil left behind, which results in oil swelling and subsequent oil viscosity reduction. Moreover, reaction of carbonate minerals such as calcite with carbonated brine results in dissolution of the main rock matrix which consequently creates wormholes similar to carbonates acidizing. In this study we propose a novel approach for accurate modeling of carbonated waterflooding process. The results of this study highlight the importance of geochemical reactions in modeling CWI process. Our approach has been validated based on history matching at the backdrop of a recently published coreflood experiment.
机译:CO2增强的储存通常受吹扫效率不佳的影响,因为注射的二氧化碳和油之间不利的迁移率对比度。为了缓解这个问题,CO2被添加到注入的盐水中并通过洪水在水库中运输。因此,碳酸注射注水(CWI),利用二氧化碳和水驱工艺。此外,注射碳酸盐和岩石之间的地球化学反应可以改变储层的岩石物理性质,并影响最终的溢油。虽然在文献中报告了几个CWI CoreFlood实验,但这种过程的模拟研究是稀缺的。 CWI性能的准确建模需要模拟器具有捕获CWI过程的真实物理的能力。在本研究中,在奥斯汀德克萨斯大学开发的组成储层模拟器,与美国地质调查,IPHREEQC开发的最先进的地球化学包装,用于模拟CWI过程。基于水库条件的热力学约束,我们考虑了盐水和烃相之间的CO2和烃相之间的影响。为了验证我们的仿真方法,将CWI模拟的结果与最近发表的CoreFlood实验进行了比较。此外,我们研究了CWI中的流体岩相互作用。模拟的结果表明,在水突破之前,主驱动机构是位移。但随着更多的碳酸水被注射,CO2将更多地扩散到后面的被困的油中,这导致油溶胀和随后的油粘度降低。此外,碳酸盐矿物如方解石,碳酸盐矿物的反应导致主岩体基质的溶解,从而产生类似于碳酸盐的蠕虫孔酸化。在这项研究中,我们提出了一种用于精确建模的碳酸水性过程的新方法。该研究的结果突出了地球化学反应在模拟CWI过程中的重要性。我们的方法已根据最近发表的CoreFlood实验的背景下的历史匹配验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号