首页> 外文会议>Annual International Conference on Material Science and Environmental Engineering >Preparation of Catalyst Supported by CuO-CoO-MnO/SiO2 Nanocomposlte Aerogel and Its Catalytic Performance In the Synthesis of Diphenyl Carbonate
【24h】

Preparation of Catalyst Supported by CuO-CoO-MnO/SiO2 Nanocomposlte Aerogel and Its Catalytic Performance In the Synthesis of Diphenyl Carbonate

机译:CuO-CoO-MNO / SiO2纳米核化合物催化剂的制备及其在合成二苯基酯的合成中的催化性能

获取原文

摘要

A novel catalyst supported by nano-porous CuO-CoO-MnO/Si02 composite aerogel was prepared by impregnation method. It was used in the catalytic synthesis of diphenyl carbonate (DPC). The effects of temperature, pressure and reaction time on the yield of DPC were investigated. The results show that Phenol and DPC can smoothly pass through the nano-pores of the composite aerogel during the catalytic synthesis of DPC. When the temperature, pressure and reaction time of DPC synthesis are 110 °C, 6.0 MPa and 6 h, respectively, the yield of DPC is 27.14 mass%, which is much higher than that of catalysts supported by other porous carriers.
机译:通过浸渍方法制备由纳米多孔CuO-CoO-MNO / SiO 2复合气凝胶负载的新型催化剂。它用于碳酸二苯基催化合成(DPC)。研究了温度,压力和反应时间对DPC产量的影响。结果表明,在DPC的催化合成期间,苯酚和DPC可以平滑地通过复合气体的纳米孔。当DPC合成的温度,压力和反应时间分别为110℃,6.0MPa和6小时,DPC的产率为27.14质量%,高于其他多孔载体支持的催化剂的产率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号