An advanced cured high carbon ferrochrome slag (HCFCS) geopolymer (GP): A constructional materials

摘要

In the recent past, investigations are reported on Geopolymer concrete. Geopolymer is known as inorganic polymer. Such materials are useful materials which are capable of replacing constructional materials such as conventional cement. In present investigations, Geopolymer is made from chromium bearing slag obtained from a ferrochrome industry (BRG steel). The mechanism involved is that the silicon and aluminium present in the high carbon ferrochrome (HCFC) slag reacts with alkali liquid, forming Geopolymer which binds other non-reactive materials in the slag. The highest strength level achieved for as-prepared Geopolymers are 11 and 15 MPa by curing 7 days and 28 days, respectively. X-ray diffraction patterns reveal that there is a gradual transformation from crystalline phase to non-crystalline phase which is due to polymeric transformation with increase in curing time. SEM micrographs confirm formation of glassy phases at a higher curing time which also corroborate with mechanical properties such as compressive strength. Distinct changes are observed in FTIR spectra i.e, increase in peak height as well as appearance of many other peaks if compared with FTIR spectrum of virgin material. This strength is due to polymeric reactions and formation of chains with the monomeric structure. Striking features of the TGA pattern is observed for the two materials i.e., uncured and cured samples. DSG isotherms show oozing out of inbuilt water which has accumulated during condensation polymerization reaction. The strength level achieved for optimum combination of variable is found to be comparable to that of standard motar of grade (M15) as is used for constructional purpose.