首页> 外文会议>International Conference on Advanced Engineering Materials and Technology >Parameter Modeling for Single Screw Pump Based On CATIA Secondary Development Platform
【24h】

Parameter Modeling for Single Screw Pump Based On CATIA Secondary Development Platform

机译:基于CATIA二级开发平台的单螺杆泵参数建模

获取原文

摘要

This article proposes parameter modeling for single screw pump and secondary development platform based on CATIA. First, we establish geometric parameter modeling of screw (rotor) and fixed bushing (stator) in CATIA. Then, a secondary development platform is developed by technology of VB and function of V5 Automation which is the primary secondary development platform for CATIA. Finally, we create a 3D model of 5/6 single screw pump and demonstrate the model's accuracy. The secondary development platform in the research can be applied to establish automatically 3D model of single screw pump, and facilitate the deep analysis and research for single screw pump.
机译:本文提出了基于CATIA的单螺杆泵和二次开发平台参数建模。首先,我们建立了CATIA中的螺钉(转子)和固定衬套(定子)的几何参数建模。然后,通过VB的技术和V5自动化的功能开发了二次开发平台,这是CATIA的主要二级开发平台。最后,我们创建了一个3D模型的5/6单螺杆泵,并展示了模型的准确性。研究中的二级开发平台可应用于自动建立单螺杆泵的3D模型,并促进单螺杆泵的深度分析和研究。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号